| auszookers.com https://auszookers.com/forum/ |
|
| Whats my brake master bore? https://auszookers.com/forum/viewtopic.php?f=5&t=18890 |
Page 1 of 1 |
| Author: | boostedbrick [ Sun Feb 06, 2011 11:45 pm ] |
| Post subject: | Whats my brake master bore? |
Any one know the bore size on a 1991 WT? From my searching there are two sizes, 13/16 and 7/8.. Save me pulling it off to measure it before I NEED to. Its stamped with what looks like Z44, and 1B2* I cant read the last digit. |
|
| Author: | tanshi [ Sun Feb 06, 2011 11:47 pm ] |
| Post subject: | Re: Whats my brake master bore? |
the side should also be stamped with the size. least the ones i have seen have been i believe |
|
| Author: | boostedbrick [ Sun Feb 06, 2011 11:54 pm ] |
| Post subject: | Re: Whats my brake master bore? |
Cant see anythin on either side, but its still in the car so its hard to see the side with the lines running into it.. |
|
| Author: | steak_knife [ Mon Feb 07, 2011 6:24 am ] |
| Post subject: | Re: Whats my brake master bore? |
boostedbrick wrote: Cant see anythin on either side, but its still in the car so its hard to see the side with the lines running into it..
3 philip's head screw's will have you driver's side mirror off, then use that to read said number, I thought they were under the master.. |
|
| Author: | Built4thrashing [ Mon Feb 07, 2011 7:02 am ] |
| Post subject: | Re: Whats my brake master bore? |
Stock sierra master cly bore is 7/8 of an inch. The bolt in forester master is 1 1/18 |
|
| Author: | boostedbrick [ Mon Feb 07, 2011 8:46 am ] |
| Post subject: | Re: Whats my brake master bore? |
steak_knife wrote: boostedbrick wrote: Cant see anythin on either side, but its still in the car so its hard to see the side with the lines running into it.. 3 philip's head screw's will have you driver's side mirror off, then use that to read said number, I thought they were under the master.. Cheers dude, it was under it.. |
|
| Author: | boostedbrick [ Mon Feb 07, 2011 8:47 am ] |
| Post subject: | Re: Whats my brake master bore? |
Built4thrashing wrote: Stock sierra master cly bore is 7/8 of an inch.
The bolt in forester master is 1 1/18 What model forester is that dude? |
|
| Author: | Built4thrashing [ Mon Feb 07, 2011 9:29 am ] |
| Post subject: | Re: Whats my brake master bore? |
about 2000 i think. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|