auszookers.com
https://auszookers.com/forum/

Machining and One Off Bolts/Bits and Pieces
https://auszookers.com/forum/viewtopic.php?f=5&t=18898		 Page 1 of 2
Author:  SuzzyBoy [ Mon Feb 07, 2011 6:03 am ]
Post subject:  Machining and One Off Bolts/Bits and Pieces
:helloo: Hey Guys :helloo:

Im a Fitter and Machinist by trade and i make a lot of my bits and pieces for my Zook

If you need any Jobs made that you cant get from the shops or u just want the same quality cheaper just let me know..

Prices for work are quite reasonable, material costs and Cheap labour..

Shoot me a pm if anything is needed - All i need is a drawing and the application of the product and i will make it from suitable grades of material for the purpose its ment for..

Once i do a few jobs or any frequent requests ill post photos up of the work i have done for yous so you can see the quality of my work

Hope to hear from yous soon :D
Author:  atari4x4 [ Mon Feb 07, 2011 6:30 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
I need 7 telescopic bolts & 4 double counter sunk bolts + postage to 5068

Image
Author:  BlueSuzy [ Mon Feb 07, 2011 6:31 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Ditto^

But i'm qualified.

And this page will prob be deleted.

Reason: http://www.auszookers.com/index.php?nam ... pic&t=8439

Atari, Im sending that to the guys at work! :lol:
Author:  SuzzyBoy [ Mon Feb 07, 2011 6:39 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
fair call man
didnt even notice a business section haha
can i move it ?
Author:  BlueSuzy [ Mon Feb 07, 2011 6:42 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Possibly. Wait till royce pipes up. :lol:

Dr Royce, Calling Dr Royce
Author:  SuzzyBoy [ Mon Feb 07, 2011 6:43 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
haha cheers mate
Author:  buzbox [ Mon Feb 07, 2011 6:49 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:

Dr Royce, Calling Dr Royce


:lol:
Author:  BlueSuzy [ Mon Feb 07, 2011 6:57 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
buzbox wrote:
BlueSuzy wrote:

Dr Royce, Calling Dr Royce


:lol:


Boobs!
Author:  shakes [ Mon Feb 07, 2011 7:28 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:
buzbox wrote:
BlueSuzy wrote:

Dr Royce, Calling Dr Royce


:lol:


Boobs!


armsup
Author:  mondo [ Mon Feb 07, 2011 7:46 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:
buzbox wrote:
BlueSuzy wrote:

Dr Royce, Calling Dr Royce


:lol:


Boobs!


Wooooo boobs :woohoo:
Author:  atari4x4 [ Mon Feb 07, 2011 7:49 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
can you machine bolts with boobs & nipples as bolt heads, i'm sure they'd sell like hot cakes.
Author:  SuzzyBoy [ Mon Feb 07, 2011 8:05 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
sure would u like a d cup or u prefer them smaller hahaha
Author:  atari4x4 [ Mon Feb 07, 2011 8:25 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
only Joe & Ball like D Cups.... If you can make the B Cups, I think you will have 90% of the market covered.
Author:  Fatzook [ Mon Feb 07, 2011 8:38 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Might have some work for ya.

What sized lathes do you have access to? What's the centrebore and bed length?
Author:  BlueSuzy [ Mon Feb 07, 2011 8:54 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Our work one is prob 1.5m bed, 75mm bore through headstock. Huge 4 jaw maximum hold prob 400mm and a medium 300mm sorta size 3jaw. Both just swapable by hand. Heavy bastards! Have a massive faceplate too but never used it.

Centre bore? Never heard that one..
Author:  LAY80N [ Mon Feb 07, 2011 9:05 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Pm sent, have access to a 3m Bed lathe if you need it.


Layto....
Author:  Fatzook [ Mon Feb 07, 2011 9:11 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:
Our work one is prob 1.5m bed, 75mm bore through headstock. Huge 4 jaw maximum hold prob 400mm and a medium 300mm sorta size 3jaw. Both just swapable by hand. Heavy bastards! Have a massive faceplate too but never used it.

Centre bore? Never heard that one..



Centre Bore, Spindle Bore, Headstock Bore etc. All the same thing.
Author:  BlueSuzy [ Mon Feb 07, 2011 9:41 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Fatzook wrote:
BlueSuzy wrote:
Our work one is prob 1.5m bed, 75mm bore through headstock. Huge 4 jaw maximum hold prob 400mm and a medium 300mm sorta size 3jaw. Both just swapable by hand. Heavy bastards! Have a massive faceplate too but never used it.

Centre bore? Never heard that one..



Centre Bore, Spindle Bore, Headstock Bore etc. All the same thing.


Maybe to you, But there is no centre bore.
Author:  Fatzook [ Mon Feb 07, 2011 9:46 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:
Fatzook wrote:
BlueSuzy wrote:
Our work one is prob 1.5m bed, 75mm bore through headstock. Huge 4 jaw maximum hold prob 400mm and a medium 300mm sorta size 3jaw. Both just swapable by hand. Heavy bastards! Have a massive faceplate too but never used it.

Centre bore? Never heard that one..



Centre Bore, Spindle Bore, Headstock Bore etc. All the same thing.


Maybe to you, But there is no centre bore.


I used to sell lathes. :roll:
Author:  BlueSuzy [ Mon Feb 07, 2011 9:49 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Show me a centre bore. :roll:
Author:  Fluffy [ Mon Feb 07, 2011 9:51 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
the hole up the guts?
Author:  Fatzook [ Mon Feb 07, 2011 9:55 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
BlueSuzy wrote:
Show me a centre bore. :roll:


Its the Bore. It runs along the centre line axis of the lathe. Centre bore. The big fucking hole. Also known as spindle bore, bore, or as you called it, a headstock bore. WTF is so hard to understand here? :roll:
Author:  ball [ Mon Feb 07, 2011 9:55 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
I call the hole up the guts the spindle bore but I have heard it called centre bore, headstock bore etc.
Author:  mondo [ Mon Feb 07, 2011 9:56 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
i've got a small lathe at home, 28mm centre bore and 1m between centres. its only small but its at home which makes it awesome. heres some work i have done on it
Author:  Fatzook [ Mon Feb 07, 2011 9:59 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Mondo?

Does your lathe have a removable gap? Gap bed? Looks like a good setup. 8)
Author:  mondo [ Mon Feb 07, 2011 10:05 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Fatzook wrote:
Mondo?

Does your lathe have a removable gap? Gap bed? Looks like a good setup. 8)


yes it does, biggest single phase machine i could find, the biggest thing for me was to find a lathe with a brake for when thread cutting up to a shoulder, was rather scary at tafe without a brake. it can handle a 2mm cut (4mm diameter) in up to 4140. pretty happy with it for $2800 new :lol:
Author:  Fatzook [ Mon Feb 07, 2011 10:12 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
mondo wrote:
Fatzook wrote:
Mondo?

Does your lathe have a removable gap? Gap bed? Looks like a good setup. 8)


yes it does, biggest single phase machine i could find, the biggest thing for me was to find a lathe with a brake for when thread cutting up to a shoulder, was rather scary at tafe without a brake. it can handle a 2mm cut (4mm diameter) in up to 4140. pretty happy with it for $2800 new :lol:


Thats not bad. What model is it? Taiwanese or chinese? I'm guessing chinese for that money :lol:

Foot brake is a must. First time I cut a thread I found out about that the hard way. Broke the toolpost 8O There was a spare quickchange post lying around anyway :lol:
Author:  mondo [ Mon Feb 07, 2011 10:19 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
yes it Taiwanese believe it or not, its a Puma. in the days before i realised people in business talk about price ex gst, i pushed him down to 2800, unknown to me that was 2800 not inc. so i've shown up to pick it up with a bank cheque written out for 2800. he wasn't happy but he took it haha. ouch you broke a quick change toolpost...them things aren't cheap!!! you don't have another floating around do ya :wink:
Author:  BlueSuzy [ Mon Feb 07, 2011 10:25 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
Fatzook wrote:
BlueSuzy wrote:
Show me a centre bore. :roll:


Its the Bore. It runs along the centre line axis of the lathe. Centre bore. The big fucking hole. Also known as spindle bore, bore, or as you called it, a headstock bore. WTF is so hard to understand here? :roll:


Not hard, your the one trying to understand. Its not called a centre bore.

By the way, I called it a Bore, and incase you didnt understand, i explained through the headstock.

Telling someone they used to sell lathes, is like telling someone they are a fitter machinist when they are a 2nd yr(Suzzyboy), or like a female in a mechanic shop that answer the phone then has no idea how to answer detailed questions, like some i have called, And many people have lingo's from other people with no idea. So, I have no idea of your background, So i dont know where your coming from.

Centre bore sounds like a lingo for the Bore. Like doova or thingo. Centre bore is more described for tubing or wheels.
Author:  Fatzook [ Mon Feb 07, 2011 10:29 am ]
Post subject:  Re: Machining and One Off Bolts/Bits and Pieces
mondo wrote:
yes it Taiwanese believe it or not, its a Puma. in the days before i realised people in business talk about price ex gst, i pushed him down to 2800, unknown to me that was 2800 not inc. so i've shown up to pick it up with a bank cheque written out for 2800. he wasn't happy but he took it haha. ouch you broke a quick change toolpost...them things aren't cheap!!! you don't have another floating around do ya :wink:


It wasn't a quick change post I broke, just a standard one. The quick change was bought for the lathe but never fitted. Until I broke the toolpost :lol:

Good work with the discount :lol: I hope you had them throw in some tooling, live centre etc before you 'brokered' the deal :lol:
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/