| auszookers.com https://auszookers.com/forum/ |
|
| know anybody that can rebuild a transfer case in se qld? https://auszookers.com/forum/viewtopic.php?f=5&t=18968 |
Page 1 of 1 |
| Author: | maddog [ Wed Feb 09, 2011 8:15 am ] |
| Post subject: | know anybody that can rebuild a transfer case in se qld? |
just pulled the transfer case out so i could put another gearbox in and now find the front bearing is shot? probably a few other things stuffed as well. anyone no what it costs to rebuild a transfer case or who i should call? don't know what its got in it but the guy i bought it of said something about 4:1. how do you tell? 
|
|
| Author: | S13RR4 [ Wed Feb 09, 2011 8:20 am ] |
| Post subject: | Re: know anybody that can rebuild a transfer case in se qld? |
might be 4.16:1 transfer gears from low range. What size tyres to you run? You could use the gearing calculator and your knowledge of revs at set speeds to work out the gears... gearing calculator http://www.lepayne.com/gears.html 4.16 gears http://www.lowrangeoffroad.com/suzuki/s ... gears.html |
|
| Author: | Teracis [ Wed Feb 09, 2011 8:46 am ] |
| Post subject: | Re: know anybody that can rebuild a transfer case in se qld? |
I'll be pulling mine out to fit 6.5's when they get here, if you wait till after that and it works out well and you want to get parts and bring beer I'm sure we could organise something? That is if your at ormeau on the gold coast? Also, front output bearing? if so you could get away with it for a few weeks provided you're not planning to go wheeling till then? Else I'd try the suzi store at Nerang? Or get the gear and have a go yourself! |
|
| Author: | remydog05 [ Wed Feb 09, 2011 8:50 am ] |
| Post subject: | Re: know anybody that can rebuild a transfer case in se qld? |
Pm Fatzook or 00zuk, both will be able to help ya. |
|
| Author: | Rusho [ Wed Feb 09, 2011 9:01 am ] |
| Post subject: | Re: know anybody that can rebuild a transfer case in se qld? |
remydog05 wrote: Pm Fatzook or 00zuk, both will be able to help ya.
|
|
| Author: | 89_tintop [ Wed Feb 09, 2011 9:16 am ] |
| Post subject: | Re: know anybody that can rebuild a transfer case in se qld? |
Pm sent |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|