| auszookers.com https://auszookers.com/forum/ |
|
| Post Engine Conversion ToDo List https://auszookers.com/forum/viewtopic.php?f=5&t=19092 |
Page 1 of 1 |
| Author: | toastysteve [ Mon Feb 14, 2011 1:01 am ] |
| Post subject: | Post Engine Conversion ToDo List |
Hey lads, Completed an engine conversion from the G13A - > G16b recently. All is running well, and I'm stoked with the result! I'm just a bit unsure about what needs to be done from here. Do I need to change my insurance, get an engineer certificate or re-register my zook or anything? If this is the case, what's the best way for a Brissy boy to go about it? Cheers for your help (as always). 
|
|
| Author: | Reubs [ Mon Feb 14, 2011 1:07 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
In QLD you need to: 1.) Tell your insurance company. Ha ha if it's RACQ then good luck - better find another... 2.) Get mod (blue) plate. 3.) Go to qld transport to swap the engine number for the new one (they need to sight it). |
|
| Author: | Fatzook [ Mon Feb 14, 2011 1:54 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
Contact these guys . $150 should cover mod plate I reckon. And they are mobile. 
|
|
| Author: | stiky [ Mon Feb 14, 2011 2:54 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
I have had no luck with insureance in qld with the 1.6 let me know how u go |
|
| Author: | Fatzook [ Mon Feb 14, 2011 3:00 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
stiky wrote: I have had no luck with insureance in qld with the 1.6 let me know how u go
Call TCIS on 1800 633 745.
|
|
| Author: | toastysteve [ Mon Feb 14, 2011 3:15 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
Good on ya boys. I'll chase it up. CTP Insurance is through Suncorp atm. |
|
| Author: | toastysteve [ Mon Feb 14, 2011 3:58 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
I'm actually looking around for a roll cage... Maybe I should get that organised first and get both covered in the mod plate... |
|
| Author: | Fatzook [ Mon Feb 14, 2011 4:04 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
toastysteve wrote: I'm actually looking around for a roll cage... Maybe I should get that organised first and get both covered in the mod plate...
maybe you should email the guys I mentioed about and see if your planned cage can be mod plated in QLD. Its always best to consult an engineer BEFORE doing mods. |
|
| Author: | toastysteve [ Mon Feb 14, 2011 4:14 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
Haha I suppose that would be the smart thing to do. |
|
| Author: | stiky [ Mon Feb 14, 2011 10:07 pm ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
Thanks fatzook I will give them a bell |
|
| Author: | neofitou [ Tue Feb 15, 2011 3:45 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
| Author: | stiky [ Tue Feb 15, 2011 5:05 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
cheers i am an enthusiest but not a member of any club |
|
| Author: | Fatzook [ Tue Feb 15, 2011 7:45 am ] |
| Post subject: | Re: Post Engine Conversion ToDo List |
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|