From what I gather for QLD:
Yes its legal, up to 2 inches, but you must get it approved BEFORE you install it then inspected afterwards.
There are 10 blocks in a Sierra.
The easiest way is to PM just_cruizin on here and get a kit
| auszookers.com https://auszookers.com/forum/ |
|
| body lift ??? https://auszookers.com/forum/viewtopic.php?f=5&t=19162 |
Page 1 of 1 |
| Author: | sambo91 [ Tue Feb 15, 2011 12:00 pm ] |
| Post subject: | body lift ??? |
are they legal? and whats the easiest way to do it from home. and how many points are there to be blocked |
|
| Author: | shep [ Tue Feb 15, 2011 12:10 pm ] |
| Post subject: | Re: body lift ??? |
what car do you want to body lift mate? |
|
| Author: | sambo91 [ Tue Feb 15, 2011 1:20 pm ] |
| Post subject: | Re: body lift ??? |
aw yeah sorry man. its a 98 Coily |
|
| Author: | Ben_Sierra [ Tue Feb 15, 2011 2:22 pm ] |
| Post subject: | Re: body lift ??? |
From what I gather for QLD: Yes its legal, up to 2 inches, but you must get it approved BEFORE you install it then inspected afterwards. There are 10 blocks in a Sierra. The easiest way is to PM just_cruizin on here and get a kit
|
|
| Author: | mondo [ Tue Feb 15, 2011 7:57 pm ] |
| Post subject: | Re: body lift ??? |
what exactly gets approved before installation? |
|
| Author: | want33s [ Tue Feb 15, 2011 8:02 pm ] |
| Post subject: | Re: body lift ??? |
Ben_Sierra wrote: From what I gather for QLD: Yes its legal, up to 2 inches, but you must get it approved BEFORE you install it then inspected afterwards. There are 10 blocks in a SWBSierra. The easiest way is to PM just_cruizin on here and get a kit mondo wrote: what exactly gets approved before installation?
You have to get approval in principle before you fit body lift..Inspection is only done after installation. |
|
| Author: | mondo [ Tue Feb 15, 2011 8:08 pm ] |
| Post subject: | Re: body lift ??? |
most excellent. not that im a fan of body lifts, but my bonnet wouldnt close with a vitara engine in it |
|
| Author: | Bruce [ Tue Feb 15, 2011 8:27 pm ] |
| Post subject: | Re: body lift ??? |
Just_Cruizin has all the correct paperwork needed and how it all works. |
|
| Author: | sambo91 [ Wed Feb 16, 2011 3:00 am ] |
| Post subject: | Re: body lift ??? |
how do i find this "Just_Cruisin" Fellow? ? ? 
thanks heaps for your help guys |
|
| Author: | tanshi [ Wed Feb 16, 2011 3:06 am ] |
| Post subject: | Re: body lift ??? |
he has a thread in the business directory |
|
| Author: | Rusho [ Wed Feb 16, 2011 3:08 am ] |
| Post subject: | Re: body lift ??? |
Look in HERE 
|
|
| Author: | TryHard [ Wed Feb 16, 2011 4:18 am ] |
| Post subject: | Re: body lift ??? |
hey Ben do u know if u can get a body lift here legalised ? |
|
| Author: | Teracis [ Wed Feb 16, 2011 5:03 am ] |
| Post subject: | Re: body lift ??? |
So how do I check if the bodylift that's in my vehicle (from before I bought it) was done properly I.E. approved + paperwork e.t.c. Would it have a modplate? |
|
| Author: | tanshi [ Wed Feb 16, 2011 5:05 am ] |
| Post subject: | Re: body lift ??? |
nope there is no mod plate for a body lift, you should have been given a DOT certificate i believe. |
|
| Author: | Teracis [ Wed Feb 16, 2011 5:06 am ] |
| Post subject: | Re: body lift ??? |
tanshi wrote: nope there is no mod plate for a body lift, you should have been given a DOT certificate i believe.
Didn't get anything but the roadworthy. |
|
| Author: | tanshi [ Wed Feb 16, 2011 5:08 am ] |
| Post subject: | Re: body lift ??? |
DOT might have that sort of thing on record, issue being if its not certified they might defect you if you went to ask?? |
|
| Author: | Teracis [ Wed Feb 16, 2011 5:10 am ] |
| Post subject: | Re: body lift ??? |
Indeed, I will just leave it as it is then. The rubber mounts at the very front are blistered on the front (the side that is/has been exposed to uv) but I can't see that being any problem. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|