I think BCF or camp shops have that kind of stuff. You might find one made from gold at ARB
| auszookers.com https://auszookers.com/forum/ |
|
| Jerry can / Fuel can holder https://auszookers.com/forum/viewtopic.php?f=5&t=19203 |
Page 1 of 1 |
| Author: | stiky [ Wed Feb 16, 2011 10:10 pm ] |
| Post subject: | Jerry can / Fuel can holder |
Any one know where i can get a fuel can holder/carrier for the back door of my sierra somethign that will sit next to the spare wheel? or any other ideas i am going north an have limited space so though it would be good to take my spare fuel tail gate door let me know peeps |
|
| Author: | steve [ Wed Feb 16, 2011 10:19 pm ] |
| Post subject: | Re: Jerry can / Fuel can holder |
I think BCF or camp shops have that kind of stuff. You might find one made from gold at ARB
|
|
| Author: | stiky [ Wed Feb 16, 2011 10:22 pm ] |
| Post subject: | Re: Jerry can / Fuel can holder |
hahhaha gold i like it yeah it doesnt need to be bullet proof i wil have a look there cheers man |
|
| Author: | Gwagensteve [ Wed Feb 16, 2011 10:35 pm ] |
| Post subject: | Re: Jerry can / Fuel can holder |
stiky wrote: hahhaha gold i like it yeah it doesnt need to be bullet proof
i wil have a look there cheers man The Jerry holder doesn't need to be bulletproof, but sadly, neither is the tailgate. Fitting a Jerry can holder to the stock tailgate will break it given time. Steve |
|
| Author: | stiky [ Wed Feb 16, 2011 10:53 pm ] |
| Post subject: | Re: Jerry can / Fuel can holder |
i realise that but i dont have much other options verry limited room for anything in the zook the roll cage takes up alot of it |
|
| Author: | shakes [ Wed Feb 16, 2011 11:18 pm ] |
| Post subject: | Re: Jerry can / Fuel can holder |
supercheap had the frame, you just need to fab up something to bolt it to your car. was $55 from memory, lockable, adjustable for various sizes etc |
|
| Author: | zook95 [ Thu Feb 17, 2011 12:02 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
yer supercrap has them |
|
| Author: | shep [ Thu Feb 17, 2011 12:20 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
3 x 20 ltr jerry cans fit in the passenger footwell and you can get another 2 directly behind the seats. i can fit 11x 20ltr cans in my lwb and still have room for a 150ltr esky, 40ltr fridge 200ltr space case and still have room for all the crap ya need for a long fishing/camping trip |
|
| Author: | JrZook [ Thu Feb 17, 2011 12:24 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
I made mine outta 3 mm alloy strips. Came out pretty good and wont rust! 
|
|
| Author: | stiky [ Thu Feb 17, 2011 12:34 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
Any one know of one where i wont need to fab up a frame or anything |
|
| Author: | shep [ Thu Feb 17, 2011 12:42 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
stiky wrote: Any one know of one where i wont need to fab up a frame or anything
i imported one from lowrange  i doubt you will find anything that will
be a straight bolt on in Aussie. be prepared to spend lots if you cant make something work. also your tailgate will fall off, mine couldn't handle just the tyre. |
|
| Author: | chris_mac [ Thu Feb 17, 2011 4:52 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
JrZook wrote: I made mine outta 3 mm alloy strips. Came out pretty good and wont rust!
is it possible to have a jerry can sitting on its long side (not standing like the one on the picture) or fuel might leak? it should only depend on how good the seal is or am i wrong? |
|
| Author: | stocker [ Thu Feb 17, 2011 5:21 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
i think that would be fail town |
|
| Author: | TryHard [ Thu Feb 17, 2011 5:28 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
couldnt u just beef up the rear tail gate bolts to solve the problem of the tail gate not been able to take it ? |
|
| Author: | shep [ Thu Feb 17, 2011 5:32 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
it isnt the bolts that are the issue the problem is that that there is nothing all that solid for the hinges to bolt to. |
|
| Author: | TryHard [ Thu Feb 17, 2011 5:53 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
shep wrote: it isnt the bolts that are the issue the problem is that that there is nothing all that solid for the hinges to bolt to.
like i said beef it up add a nice big peace of plate drill 4 holes though the nice beefy peace of plate and place the plate at he back and use the plate as big washer ? to distribute the load ? on the hinges across a bigger surface |
|
| Author: | shep [ Thu Feb 17, 2011 5:59 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
TryHard wrote: shep wrote: it isnt the bolts that are the issue the problem is that that there is nothing all that solid for the hinges to bolt to. like i said beef it up add a nice big peace of plate drill 4 holes though the nice beefy peace of plate and place the plate at he back and use the plate as big washer ? to distribute the load ? on the hinges across a bigger surface i thought about doing that but i didn't want to cut out the inner panel bit so i could access where the hinges are and the plate would still be mounted to the 0.7mm panel . easier to score a swing away carrier. |
|
| Author: | salih [ Thu Feb 17, 2011 6:00 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
$18 jerry can holder http://cgi.ebay.com.au/Jerry-Can-Holder ... 1c1499d35f buy this and go to a exhaust place get them to weld a mount or some thing to ur back door problem solved |
|
| Author: | JrZook [ Thu Feb 17, 2011 6:05 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
shep wrote: TryHard wrote: shep wrote: it isnt the bolts that are the issue the problem is that that there is nothing all that solid for the hinges to bolt to. like i said beef it up add a nice big peace of plate drill 4 holes though the nice beefy peace of plate and place the plate at he back and use the plate as big washer ? to distribute the load ? on the hinges across a bigger surface i thought about doing that but i didn't want to cut out the inner panel bit so i could access where the hinges are and the plate would still be mounted to the 0.7mm panel . easier to score a swing away carrier. My fix so far 
Thread: http://www.auszookers.com/index.php?nam ... 365#323365 Dan |
|
| Author: | TryHard [ Thu Feb 17, 2011 6:09 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
hmmm looks good how strong is it |
|
| Author: | JrZook [ Thu Feb 17, 2011 6:13 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
TryHard wrote: hmmm looks good how strong is it
2x4mm Gal angle sandwiched together. Im guessing a bit stronger than the 0.8steel outer skin and the extra 0.8mm internal skin suzuki used to strengthen it. Dan |
|
| Author: | Fatzook [ Thu Feb 17, 2011 8:24 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
JrZook wrote: TryHard wrote: hmmm looks good how strong is it 2x4mm Gal angle sandwiched together. Im guessing a bit stronger than the 0.8steel outer skin and the extra 0.8mm internal skin suzuki used to strengthen it. Dan Stop guessing  Surely your illiterate ass could calculate a rough figure for us? 
|
|
| Author: | JrZook [ Thu Feb 17, 2011 8:29 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
Fatzook wrote: JrZook wrote: TryHard wrote: hmmm looks good how strong is it 2x4mm Gal angle sandwiched together. Im guessing a bit stronger than the 0.8steel outer skin and the extra 0.8mm internal skin suzuki used to strengthen it. Dan Stop guessing Surely your illiterate ass could calculate a rough figure for us? Bah give me a break and a rum!! Bloody brain is fried from trying to work out why SiC+O2 = SiOC compounds not the SiO2 and CO taht i want. Shesh!!
|
|
| Author: | steak_knife [ Thu Feb 17, 2011 8:33 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
 Sic.....
|
|
| Author: | Fatzook [ Thu Feb 17, 2011 8:44 am ] |
| Post subject: | Re: Jerry can / Fuel can holder |
JrZook wrote: Bah give me a break and a rum!! Bloody brain is fried from trying to work out why SiC+O2 = SiOC compounds not the SiO2 and CO taht i want. Shesh!!
Too many protons
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|