| auszookers.com https://auszookers.com/forum/ |
|
| engine conversion again https://auszookers.com/forum/viewtopic.php?f=5&t=19211 |
Page 1 of 1 |
| Author: | russty_2008 [ Thu Feb 17, 2011 4:49 am ] |
| Post subject: | engine conversion again |
im picking up a baleno this weekend and bit worried about the fuel pump should i/can i just use the baleno fuel tank and pump in the sierra the sierra isnt registed so legality isnt a problem |
|
| Author: | Fatzook [ Thu Feb 17, 2011 8:01 am ] |
| Post subject: | Re: engine conversion again |
russty_2008 wrote: im picking up a baleno this weekend and bit worried about the fuel pump should i/can i just use the baleno fuel tank and pump in the sierra the sierra isnt registed so legality isnt a problem
You'll need an extrenal EFI pump, or a coily tank with a vit swimmer pump. |
|
| Author: | CairnsZook [ Thu Feb 17, 2011 8:14 am ] |
| Post subject: | Re: engine conversion again |
If you have a coily, you can bolt the Baleno pump into the tank. The coily tank already has a swirl pot. You will need to extend the pump though. 
If you have a leafy fuel tank, you will need an external surge tank with EFI pump etc... I very much doubt you could get a Baleno tank to fit in a Sierra. |
|
| Author: | Rhino [ Thu Feb 17, 2011 8:15 am ] |
| Post subject: | Re: engine conversion again |
russty_2008 wrote: im picking up a baleno this weekend and bit worried about the fuel pump should i/can i just use the baleno fuel tank and pump in the sierra the sierra isnt registed so legality isnt a problem
Thats the exact thing im looking at doing on my lwb build. Baleno tank might not fit real nice in a SWB as its very shallow and basicaly the entrie width of a baleno. Im looking at mounting mine length ways under the tray of my lwb. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|