One could only imagine what you thought when you read the subject
In regards to the front end of the Vit's do all the SWB bars ( as in stock front bars ) fit the LWB??? along with the quarters etc...???
| auszookers.com https://auszookers.com/forum/ |
|
| Body Parts https://auszookers.com/forum/viewtopic.php?f=5&t=19219 |
Page 1 of 1 |
| Author: | stocker [ Thu Feb 17, 2011 6:55 am ] |
| Post subject: | Body Parts |
One could only imagine what you thought when you read the subject
In regards to the front end of the Vit's do all the SWB bars ( as in stock front bars ) fit the LWB??? along with the quarters etc...??? |
|
| Author: | atari4x4 [ Thu Feb 17, 2011 7:00 am ] |
| Post subject: | Re: Body Parts |
front guards i would think yes, the LWB & SWB both have a different front crossmember/chassis set up so i'd say that the bumper mounts would be different. |
|
| Author: | stocker [ Thu Feb 17, 2011 7:05 am ] |
| Post subject: | Re: Body Parts |
i've got the original bar support... just the plastic is all pushed in from an acco.. |
|
| Author: | atari4x4 [ Thu Feb 17, 2011 7:14 am ] |
| Post subject: | Re: Body Parts |
pics of damage 
yeah the plastic should swap over, just remember there are 2 locations for the side indicators on vits. |
|
| Author: | stocker [ Thu Feb 17, 2011 7:24 am ] |
| Post subject: | Re: Body Parts |
I'll Upload them 2morro as for tonight sleepy time
|
|
| Author: | Westie [ Thu Feb 17, 2011 8:16 am ] |
| Post subject: | Re: Body Parts |
There are about 5 or 6 differant bumpers from 89 -96 that I have found and the mounts to are differant. |
|
| Author: | want33s [ Thu Feb 17, 2011 8:24 am ] |
| Post subject: | Re: Body Parts |
stocker wrote: In regards to the front end of the Vit's do all the SWB bars ( as in stock front bars ) fit the LWB??? along with the quarters etc...???
You talking about the front or the rear of your car??? Quarter panels are at the rear... Guards are at the front. |
|
| Author: | stocker [ Thu Feb 17, 2011 8:34 am ] |
| Post subject: | Re: Body Parts |
Westie wrote: There are about 5 or 6 differant bumpers from 89 -96 that I have found and the mounts to are differant.
just like everything else with a vit... its like every year they up'ed and changed the design slightly... as for the quarters... my bad, ive just always called them that :S and yes i was talking about the front. At the moment, i have a 96 LWB which i require - Black Front bar - Maroon Front Right Guard or quarter what ever they are called. - The Strip across the front which supports the bonnet latch horn etc.. - Maroon Grille |
|
| Author: | want33s [ Thu Feb 17, 2011 7:40 pm ] |
| Post subject: | Re: Body Parts |
I have a pair of 89 guards and the filler between bonnet and lights.. Being 89 the indicators are forward mounted unlike your, rearward. $100 the lot. Drivers guard has minor dent but easy fixed. All in shiny metallic blue... 
|
|
| Author: | stocker [ Fri Feb 18, 2011 3:51 am ] |
| Post subject: | Re: Body Parts |
haha, thanks, but im really after some panel's i don't have to paint... which won't make my car look like a patchwork quilt... if you happen to get a maroon one in let me know. Cheers |
|
| Author: | stocker [ Sun Feb 20, 2011 5:59 am ] |
| Post subject: | Re: Body Parts |
Ok So I've Decided to Clean up and Panda-ise Tara 
Was thinkin about making my own bar for her... has anyone else done this on the vits??? any advice would be great as i've never attempted something like this before
|
|
| Author: | BlueSuzy [ Sun Feb 20, 2011 6:10 am ] |
| Post subject: | Re: Body Parts |
http://www.auszookers.com/index.php?nam ... 96&start=0 Good little build^ Can you weld? This bar looks good for a hairdresser.. 
|
|
| Author: | stocker [ Sun Feb 20, 2011 6:58 am ] |
| Post subject: | Re: Body Parts |
yeah cheers dude, thats great looking bar work. yeah i can weld, well soughtof
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|