auszookers.com :: View topic - H series engine throttle body

Does anyone know if a throttle body off a 2.5 or 2.7 will bolt up to a 2 litre and if they are bigger
Coming from when I owned a crumpledore bolting a 5 litre throttle body onto a 3.8 litre was a good power up
And was wondering if this would work in the same way for the h20a
What are your thoughts.

inbits wrote:

May be bigger but without more fuel I fail to see any advantage

x2 it may trick the ecu into giving more fuel, but how will the manifold flow to suit? Are the 2.7 manifolds larger?

BlueSuzy wrote:

x2 it may trick the ecu into giving more fuel, but how will the manifold flow to suit? Are the 2.7 manifolds larger?

why?
the airflow meter determins that not the throttle body.
more likely it could lower your airflow velocity at low revs and give less power down low

NOS or you could try one of those ebay "chips" or electric "superchargers"

Author:	inbits [ Fri Feb 18, 2011 10:47 am ]
Post subject:	H series engine throttle body
Does anyone know if a throttle body off a 2.5 or 2.7 will bolt up to a 2 litre and if they are bigger Coming from when I owned a crumpledore bolting a 5 litre throttle body onto a 3.8 litre was a good power up And was wondering if this would work in the same way for the h20a What are your thoughts.

Author:	Fatzook [ Fri Feb 18, 2011 10:54 am ]
Post subject:	Re: H series engine throttle body
inbits wrote: Does anyone know if a throttle body off a 2.5 or 2.7 will bolt up to a 2 litre and if they are bigger Coming from when I owned a crumpledore bolting a 5 litre throttle body onto a 3.8 litre was a good power up And was wondering if this would work in the same way for the h20a What are your thoughts. May be bigger but without more fuel I fail to see any advantage

Author:	inbits [ Fri Feb 18, 2011 11:04 am ]
Post subject:	Re: H series engine throttle body
Better air flow and with a decent exhaust should get rid of its asthma?

Author:	BlueSuzy [ Fri Feb 18, 2011 11:06 am ]
Post subject:	Re: H series engine throttle body
x2 it may trick the ecu into giving more fuel, but how will the manifold flow to suit? Are the 2.7 manifolds larger?

Author:	JrZook [ Fri Feb 18, 2011 11:56 am ]
Post subject:	Re: H series engine throttle body
Fatzook wrote: inbits wrote: Does anyone know if a throttle body off a 2.5 or 2.7 will bolt up to a 2 litre and if they are bigger Coming from when I owned a crumpledore bolting a 5 litre throttle body onto a 3.8 litre was a good power up And was wondering if this would work in the same way for the h20a What are your thoughts. May be bigger but without more fuel I fail to see any advantage What do these engines run? MAF or MAP? Either which way the stock ECU can account for a moderate change in air flow characteristics as it uses either of the sensors to calculate overall ingested air.

auszookers.com https://auszookers.com/forum/

H series engine throttle body https://auszookers.com/forum/viewtopic.php?f=5&t=19253	Page 1 of 1

Author:	steak_knife [ Fri Feb 18, 2011 9:20 pm ]
Post subject:	Re: H series engine throttle body
Map.. I'm sure it could be made to fit, but, the H20's intake is far to small & run's different sensor's, get a 2.5 or 2.7 from the wrecker's or the like, you'll be snapping axle's with the rest off em.. H20 ecu I'm told can run a 2.5, BUT you have to run the lil H20 intake for the sensor's, defeating the purpose of the upgrade, so, H25 & ecu would give you more than enough power..

Author:	ajsr [ Fri Feb 18, 2011 9:29 pm ]
Post subject:	Re: H series engine throttle body
BlueSuzy wrote: x2 it may trick the ecu into giving more fuel, but how will the manifold flow to suit? Are the 2.7 manifolds larger? why? the airflow meter determins that not the throttle body. more likely it could lower your airflow velocity at low revs and give less power down low

Author:	steak_knife [ Fri Feb 18, 2011 9:32 pm ]
Post subject:	Re: H series engine throttle body
ajsr wrote: BlueSuzy wrote: x2 it may trick the ecu into giving more fuel, but how will the manifold flow to suit? Are the 2.7 manifolds larger? why? the airflow meter determins that not the throttle body. more likely it could lower your airflow velocity at low revs and give less power down low That's right, it's built into the throttle body..

Author:	inbits [ Fri Feb 18, 2011 10:32 pm ]
Post subject:	Re: H series engine throttle body
I'd love a 2.5 litre but can't justify it when my engine has nothing wrong I was just after a cheaper option to power it I understand what you guys are saying I'll Just have to wait until my engine let's go it's got pretty low klms so it will be a while lol Is there any other cheaper options to get a few more ponies ?

Author:	atari4x4 [ Fri Feb 18, 2011 10:42 pm ]
Post subject:	Re: H series engine throttle body
NOS or you could try one of those ebay "chips" or electric "superchargers"

Author:	steak_knife [ Fri Feb 18, 2011 10:45 pm ]
Post subject:	Re: H series engine throttle body
atari4x4 wrote: NOS or you could try one of those ebay "chips" or electric "superchargers" Or premium ULP....

Author:	inbits [ Fri Feb 18, 2011 10:50 pm ]
Post subject:	Re: H series engine throttle body
Already use premium So I guess that answers my question thanks for the info

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/