i prefer oddball pioneering when it comes to car conversions doing things that have been done before represent no challenge and provide little wtf factor. The only half cuts i can find range from 6-8k
maybe its time to start saving
| auszookers.com https://auszookers.com/forum/ |
|
| honda f20c https://auszookers.com/forum/viewtopic.php?f=5&t=19281 |
Page 1 of 1 |
| Author: | MrRocky [ Sat Feb 19, 2011 9:38 pm ] |
| Post subject: | honda f20c |
anyone know anything about the rwd f20c engine from the s2000 honda seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. |
|
| Author: | Damo [ Sat Feb 19, 2011 9:44 pm ] |
| Post subject: | Re: honda f20c |
MrRocky wrote: anyone know anything about the rwd f20c engine from the s2000 honda
seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. Like you said, they're not cheap. Waste of $ in a zook IMO! |
|
| Author: | buzbox [ Sat Feb 19, 2011 9:46 pm ] |
| Post subject: | Re: honda f20c |
| Author: | MrRocky [ Sat Feb 19, 2011 9:52 pm ] |
| Post subject: | Re: honda f20c |
i prefer oddball pioneering when it comes to car conversions doing things that have been done before represent no challenge and provide little wtf factor. The only half cuts i can find range from 6-8k
maybe its time to start saving
|
|
| Author: | boostedbrick [ Sat Feb 19, 2011 9:55 pm ] |
| Post subject: | Re: honda f20c |
It has been done in the states.. Epic wireing. And id be worried about torque.. s2000 owners are always complaing at the lack of it. I dont see this as something been able to be tuned out. Since there desigend for topend power. |
|
| Author: | buzbox [ Sat Feb 19, 2011 9:57 pm ] |
| Post subject: | Re: honda f20c |
well put in a 4age and twin charge it. 
|
|
| Author: | boostedbrick [ Sat Feb 19, 2011 10:01 pm ] |
| Post subject: | Re: honda f20c |
Excess wireing 
http://www.zukikrawlers.com/showthread.php?t=37664 |
|
| Author: | BlueSuzy [ Sat Feb 19, 2011 10:48 pm ] |
| Post subject: | Re: honda f20c |
Pure porn for me! I would of loved one in my old rolla, even though its a honda motor.. Sound so hot. The price is one of the biggest problems. |
|
| Author: | xedent [ Sat Feb 19, 2011 10:56 pm ] |
| Post subject: | Re: honda f20c |
and how high do they rev again... 
|
|
| Author: | Damo [ Sat Feb 19, 2011 10:58 pm ] |
| Post subject: | Re: honda f20c |
xedent wrote: and how high do they rev again...
9000 from memory |
|
| Author: | FullyZooked [ Sat Feb 19, 2011 11:19 pm ] |
| Post subject: | Re: honda f20c |
I can hear driveline explosions a mile of with this one. But how freakin awsome would it be! The sound of that puppy winding up would be very nice! |
|
| Author: | shakes [ Sun Feb 20, 2011 12:23 am ] |
| Post subject: | Re: honda f20c |
Damo wrote: xedent wrote: and how high do they rev again... 9000 from memory blacktop 20v 4age would be my pic, with a rotary following very close behind. I started doing a little research into these for my old ae71.. wiring wise they where way outa my depth so i binned it. plus lots of little headaches like the exhaust is on the wrong side... easier options with the same result 
|
|
| Author: | hooki [ Sun Feb 20, 2011 4:42 am ] |
| Post subject: | Re: honda f20c |
they are an awesome engine. Like you said though, not cheap. Power down low would be fine for a zuk and as soon as it's reving hard they really pull. People with west fields and clubmans etc mostly always choose one of these over the 20v 4age if they have the choice between the two, just because they are a newer more tunable engine, the only downfall is they are hard to find and cost alot. |
|
| Author: | Damo [ Sun Feb 20, 2011 5:07 am ] |
| Post subject: | Re: honda f20c |
MrRocky wrote: anyone know anything about the rwd f20c engine from the s2000 honda
seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. If all you want to do make things hard for yourself then how about a Toyo 2azfe (from late model Camry/Rav4/Kluger). All alloy, 2.4 litre, 150hp. It'd be a lot easier to find and shit-tins cheaper than a F20. |
|
| Author: | alien [ Sun Feb 20, 2011 6:43 am ] |
| Post subject: | Re: honda f20c |
pff... put one of these in: http://www.h1v8.com/page/page/1562068.htm |
|
| Author: | mondo [ Sun Feb 20, 2011 6:54 am ] |
| Post subject: | Re: honda f20c |
alien wrote: pff... put one of these in: http://www.h1v8.com/page/page/1562068.htm
thats awesome |
|
| Author: | MrRocky [ Sun Feb 20, 2011 7:49 am ] |
| Post subject: | Re: honda f20c |
Damo wrote: MrRocky wrote: anyone know anything about the rwd f20c engine from the s2000 honda seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. If all you want to do make things hard for yourself then how about a Toyo 2azfe (from late model Camry/Rav4/Kluger). All alloy, 2.4 litre, 150hp. It'd be a lot easier to find and shit-tins cheaper than a F20. are those things rwd ? high output n/a 4 bangers are few and far between but it might be a much cheaper option 
|
|
| Author: | Taylor74 [ Sun Feb 20, 2011 10:48 am ] |
| Post subject: | Re: honda f20c |
mondo wrote:
Do it Mick Ill even give you a hand after work to save the $ |
|
| Author: | Damo [ Sun Feb 20, 2011 10:59 am ] |
| Post subject: | Re: honda f20c |
MrRocky wrote: Damo wrote: MrRocky wrote: anyone know anything about the rwd f20c engine from the s2000 honda seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. If all you want to do make things hard for yourself then how about a Toyo 2azfe (from late model Camry/Rav4/Kluger). All alloy, 2.4 litre, 150hp. It'd be a lot easier to find and shit-tins cheaper than a F20. are those things rwd ? high output n/a 4 bangers are few and far between but it might be a much cheaper option All FWD/AWD as far as I know. No biggie, just adapt a 5 speed from something else. |
|
| Author: | alien [ Sun Feb 20, 2011 12:17 pm ] |
| Post subject: | Re: honda f20c |
Taylor74 wrote: mondo wrote: Do it Mick Ill even give you a hand after work to save the $ what he said... i'll even design the stickers to go on the zuk after its done =P sierrabusa? haha |
|
| Author: | roughzook [ Mon Feb 21, 2011 10:29 am ] |
| Post subject: | Re: honda f20c |
Damo wrote: MrRocky wrote: Damo wrote: MrRocky wrote: anyone know anything about the rwd f20c engine from the s2000 honda seems like it would be a prime candidate for an engine swap. being a new honda i assume an engine and gbox cut would be damn expensive as well as parts. If all you want to do make things hard for yourself then how about a Toyo 2azfe (from late model Camry/Rav4/Kluger). All alloy, 2.4 litre, 150hp. It'd be a lot easier to find and shit-tins cheaper than a F20. are those things rwd ? high output n/a 4 bangers are few and far between but it might be a much cheaper option All FWD/AWD as far as I know. No biggie, just adapt a 5 speed from something else. agreed. or sr20de |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|