| auszookers.com https://auszookers.com/forum/ |
|
| Vitara wheel cylinders https://auszookers.com/forum/viewtopic.php?f=5&t=19282 |
Page 1 of 1 |
| Author: | matty_wall [ Sat Feb 19, 2011 10:03 pm ] |
| Post subject: | Vitara wheel cylinders |
One of my rear wheel cylinders is leaking so I went down to Scotts to get a new one. Turns out there catalogue shows two different sizes, does anyone know which size I should get? Also, there's been a few occasions where the brake pedal will go straight to the floor and I have to pump the pedal for it to work proplery again. Is this related to the wheel cylinder leaking or something else? Forgot to mention it's a 92 SWB Any ideas or help is very much appreciated. Matt |
|
| Author: | Westie [ Sun Feb 20, 2011 1:31 am ] |
| Post subject: | Re: Vitara wheel cylinders |
Remove the old 1 and take it down or measure the bore but replace BOTH |
|
| Author: | matty_wall [ Sat Mar 05, 2011 5:06 am ] |
| Post subject: | Re: Vitara wheel cylinders |
Using your wisdom westie i ordered two. For anyone wondering i went to better brakes to get them. He looked at the master cylinder and determined i needed 7/8 size. |
|
| Author: | Westie [ Sat Mar 05, 2011 9:29 am ] |
| Post subject: | Re: Vitara wheel cylinders |
matty_wall wrote: Using your wisdom westie i ordered two.
For anyone wondering i went to better brakes to get them. He looked at the master cylinder and determined i needed 7/8 size. Always better to do the Job right the first time |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|