pyrohamish wrote:
I assume you have the chassis drawing from the FSM.
I'm guessing he wants to do some 3D modelling. The FSM data is only usefull if you wish to draw a chassis from scratch. Thats ALOT of work in solidworks
| auszookers.com https://auszookers.com/forum/ |
|
| Solidworks, WT Sierra, CAD drawings Wanted https://auszookers.com/forum/viewtopic.php?f=5&t=19293 |
Page 1 of 1 |
| Author: | Dale [ Sun Feb 20, 2011 7:24 am ] |
| Post subject: | Solidworks, WT Sierra, CAD drawings Wanted |
Hey All I'm chasing down a 3D drawing of a wide track sierra, SWB. I have found a drawing of the body here, http://www.3dcontentcentral.com/Search.aspx?arg=samurai which some of you might be interested in. However I'm really after a chassis and body drawing, or just a chassis drawing. If anyone has one in either solidworks/Autocad or simular don't mind sharing it, that would be great. If not I might have to get cracking on some drawings. Thanks Dale |
|
| Author: | jdk81 [ Sun Feb 20, 2011 8:33 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
Do we need to include all the rust in the drawing? |
|
| Author: | pyrohamish [ Sun Feb 20, 2011 8:42 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
I assume you have the chassis drawing from the FSM. |
|
| Author: | Fatzook [ Sun Feb 20, 2011 9:38 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
pyrohamish wrote: I assume you have the chassis drawing from the FSM.
I'm guessing he wants to do some 3D modelling. The FSM data is only usefull if you wish to draw a chassis from scratch. Thats ALOT of work in solidworks
|
|
| Author: | pyrohamish [ Sun Feb 20, 2011 10:50 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
Just had a look and theres not even close to enough info to even make the chassis rails from those drawings, I was going to have a go in rhino. |
|
| Author: | got_bar_work [ Mon Feb 21, 2011 12:59 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
maybe joe has one scaned pm him or kenny to ask him |
|
| Author: | LAY80N [ Mon Feb 21, 2011 3:46 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
I had a .DWG of a SWB and LWB chassis (2D) on my old PC. If i ever get round to fixing it i will send them. But at teh moment fixing that has been at teh bottom of the list for a while sorry. Layto.... |
|
| Author: | pyrohamish [ Tue Feb 22, 2011 5:46 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
Can you post them up anyway? |
|
| Author: | LAY80N [ Tue Feb 22, 2011 5:59 am ] |
| Post subject: | Re: Solidworks, WT Sierra, CAD drawings Wanted |
pyrohamish wrote: Can you post them up anyway?
My old PC died in a big way. I havent tried to recover the data yet, been way to busy. If i do i will post up. Layto.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|