auszookers.com :: View topic

Inbits,

Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that.

Russty, have a go at thisI hope I have it right.

Its pretty long, but it gives a lot of info, some that you may not yet realize you need.

We will have to see who's 1.6 is the best all rounder russ. Haha when I finally finish mine

SuziBlu wrote:

Well considering this bloke has been given this information already I think inbits has; without knowing it; hit the nail on the head. So pull your head in.

http://auszookers.com/index.php?name=Forums&file=viewtopic&t=19165

Fatzook wrote:

SuziBlu wrote:

I most humbly apologize.

Mind, at the same time, cracking up about this search thing. I have started, on me, er, hmmmm, .

Sorry if I have spoken out of place.

Seriously.

sorry lads get a bit excited/pissed ha ha is there such thing as a wiring loom to mate a g16b to a sierra 1.3 leafy

yep, there is a dude on outerlimits that makes looms to go from carby 1.3 to EFI 1.6, have a search around here as someone has used one recently to do the conversion.

SuziBlu wrote:

So telling a bloke to have a look in good tech where there is good
Info is adding nothing
Sorry to be a fuck wit and piss you off :roll:

Not starting shit just sticking up for my side lol
Sorry

SuziBlu wrote:

Fatzook wrote:

SuziBlu wrote:

I most humbly apologize.

Mind, at the same time, cracking up about this search thing. I have started, on me, er, hmmmm, .

Sorry if I have spoken out of place.

Seriously.

We all get our foot stuck in our mouth from time to time :lol:

Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal!

royce wrote:

I've thought the same a few times now. :roll:

STill. its only $400 and I fucking hate wiring :evil:

inbits wrote:

Not starting shit just sticking up for my side lol
Sorry

Already done in your absence :wink:

royce wrote:

I've thought the same a few times now. :roll:

STill. its only $400 and I fucking hate wiring :evil:

Fatzook wrote:

royce wrote:

I've thought the same a few times now. :roll:

STill. its only $400 and I fucking hate wiring :evil:

So does Dan especially when he's cronically hungover and teh engine is said to have correct cam timing etc :roll:

Author:	russty_2008 [ Mon Feb 21, 2011 6:17 am ]
Post subject:	1.6 conversion
does anyone know of any good threads on a baleno conversion into a sierra

Author:	inbits [ Mon Feb 21, 2011 6:18 am ]
Post subject:	Re: 1.6 conversion
have a look in good tech its been covered a gazzillion times

Author:	SuziBlu [ Mon Feb 21, 2011 6:46 am ]
Post subject:	Re: 1.6 conversion
Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need.

Author:	Fatzook [ Mon Feb 21, 2011 6:51 am ]
Post subject:	Re: 1.6 conversion
SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. Well considering this bloke has been given this information already I think inbits has; without knowing it; hit the nail on the head. So pull your head in. http://auszookers.com/index.php?name=Forums&file=viewtopic&t=19165

Author:	ZookZilla96 [ Mon Feb 21, 2011 6:54 am ]
Post subject:	Re: 1.6 conversion
We will have to see who's 1.6 is the best all rounder russ. Haha when I finally finish mine

auszookers.com https://auszookers.com/forum/

1.6 conversion https://auszookers.com/forum/viewtopic.php?f=5&t=19334	Page 1 of 1

Author:	russty_2008 [ Mon Feb 21, 2011 7:22 am ]
Post subject:	Re: 1.6 conversion
ZookZilla96 wrote: We will have to see who's 1.6 is the best all rounder russ. Haha when I finally finish mine ha ha yer cant wait to get em out mate should be good fun

Author:	SuziBlu [ Mon Feb 21, 2011 7:27 am ]
Post subject:	Re: 1.6 conversion
Fatzook wrote: SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. Well considering this bloke has been given this information already I think inbits has; without knowing it; hit the nail on the head. So pull your head in. http://auszookers.com/index.php?name=Forums&file=viewtopic&t=19165 I most humbly apologize. Mind, at the same time, cracking up about this search thing. I have started, on me, er, hmmmm, . Sorry if I have spoken out of place. Seriously.

Author:	Fatzook [ Mon Feb 21, 2011 7:33 am ]
Post subject:	Re: 1.6 conversion
SuziBlu wrote: Fatzook wrote: SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. Well considering this bloke has been given this information already I think inbits has; without knowing it; hit the nail on the head. So pull your head in. http://auszookers.com/index.php?name=Forums&file=viewtopic&t=19165 I most humbly apologize. Mind, at the same time, cracking up about this search thing. I have started, on me, er, hmmmm, . Sorry if I have spoken out of place. Seriously. We all get our foot stuck in our mouth from time to time

Author:	russty_2008 [ Mon Feb 21, 2011 8:05 am ]
Post subject:	Re: 1.6 conversion
sorry lads get a bit excited/pissed ha ha is there such thing as a wiring loom to mate a g16b to a sierra 1.3 leafy

Author:	Fatzook [ Mon Feb 21, 2011 8:11 am ]
Post subject:	Re: 1.6 conversion
russty_2008 wrote: sorry lads get a bit excited/pissed ha ha is there such thing as a wiring loom to mate a g16b to a sierra 1.3 leafy YEP

Author:	steak_knife [ Mon Feb 21, 2011 8:12 am ]
Post subject:	Re: 1.6 conversion
russty_2008 wrote: sorry lads get a bit excited/pissed ha ha is there such thing as a wiring loom to mate a g16b to a sierra 1.3 leafy Send you harness to killa custom? I think that's the name, but send him a harness for the eng your fitting & tell him what car & he'll send back a plug in harness, you'll be a lil lighter in the back pocket, but his work is very good.

Author:	atari4x4 [ Mon Feb 21, 2011 8:13 am ]
Post subject:	Re: 1.6 conversion
yep, there is a dude on outerlimits that makes looms to go from carby 1.3 to EFI 1.6, have a search around here as someone has used one recently to do the conversion. EDIT: what steakman said fark i'm extra slow tonight, must be the spider venom kicking in EDIT: what Fatzooook said

Author:	Fatzook [ Mon Feb 21, 2011 8:14 am ]
Post subject:	Re: 1.6 conversion
atari4x4 wrote: yep, there is a dude on outerlimits that makes looms to go from carby 1.3 to EFI 1.6, have a search around here as someone has used one recently to do the conversion. Or you could click the link to him 3 posts above

Author:	atari4x4 [ Mon Feb 21, 2011 8:22 am ]
Post subject:	Re: 1.6 conversion

Author:	want33s [ Mon Feb 21, 2011 9:33 am ]
Post subject:	Re: 1.6 conversion
Steve (Killa custom cables) does good work.... I wish I got a commision for every job I've sent him after he did my first two EFI setups to learn about Zooks.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	inbits [ Mon Feb 21, 2011 9:13 am ]
Post subject:	Re: 1.6 conversion
SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. So telling a bloke to have a look in good tech where there is good Info is adding nothing Sorry to be a fuck wit and piss you off

Author:	Fatzook [ Mon Feb 21, 2011 9:16 am ]
Post subject:	Re: 1.6 conversion
inbits wrote: SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. So telling a bloke to have a look in good tech where there is good Info is adding nothing Sorry to be a fuck wit and piss you off Dude its over. He appologised He must have got out of the wrong side of bed this morning

Author:	inbits [ Mon Feb 21, 2011 9:19 am ]
Post subject:	Re: 1.6 conversion
Not starting shit just sticking up for my side lol Sorry

Author:	Fatzook [ Mon Feb 21, 2011 9:20 am ]
Post subject:	Re: 1.6 conversion
inbits wrote: Not starting shit just sticking up for my side lol Sorry Already done in your absence

Author:	SuziBlu [ Mon Feb 21, 2011 9:28 am ]
Post subject:	Re: 1.6 conversion
Fatzook wrote: SuziBlu wrote: Fatzook wrote: SuziBlu wrote: Inbits, Nothing on earth pisses me off more than a fukwit like you, answers a post with nothing to add, add something, or fuk off, whats hard to understand about that. Russty, have a go at thisI hope I have it right. Its pretty long, but it gives a lot of info, some that you may not yet realize you need. Well considering this bloke has been given this information already I think inbits has; without knowing it; hit the nail on the head. So pull your head in. http://auszookers.com/index.php?name=Forums&file=viewtopic&t=19165 I most humbly apologize. Mind, at the same time, cracking up about this search thing. I have started, on me, er, hmmmm, . Sorry if I have spoken out of place. Seriously. We all get our foot stuck in our mouth from time to time One foot, easy, its when I do both feet.

Author:	royce [ Mon Feb 21, 2011 9:32 am ]
Post subject:	Re: 1.6 conversion
Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal!

Author:	Fatzook [ Mon Feb 21, 2011 9:35 am ]
Post subject:	Re: 1.6 conversion
royce wrote: Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal! I've thought the same a few times now. STill. its only $400 and I fucking hate wiring

Author:	SuziBlu [ Mon Feb 21, 2011 9:38 am ]
Post subject:	Re: 1.6 conversion
Fatzook wrote: royce wrote: Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal! I've thought the same a few times now. STill. its only $400 and I fucking hate wiring Yep. I sort of understand wiring, enuf to know, naaaaaa

Author:	royce [ Mon Feb 21, 2011 9:42 am ]
Post subject:	Re: 1.6 conversion
sure there is a few dollars in tape and fuse boxes and shit (ok so quite a few dollars) but shit sounds like a good weekend job anyone got a sierra loom and g16b loom floating around?

Author:	inbits [ Mon Feb 21, 2011 9:46 am ]
Post subject:	Re: 1.6 conversion
Fatzook wrote: inbits wrote: Not starting shit just sticking up for my side lol Sorry Already done in your absence Realized that after I posted Sorry suziblu

Author:	SuziBlu [ Mon Feb 21, 2011 9:49 am ]
Post subject:	Re: 1.6 conversion

Author:	JrZook [ Mon Feb 21, 2011 10:27 am ]
Post subject:	Re: 1.6 conversion
Fatzook wrote: royce wrote: Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal! I've thought the same a few times now. STill. its only $400 and I fucking hate wiring So does Dan especially when he's cronically hungover and teh engine is said to have correct cam timing etc

Author:	Fatzook [ Mon Feb 21, 2011 10:32 am ]
Post subject:	Re: 1.6 conversion
JrZook wrote: Fatzook wrote: royce wrote: Fuck me $400 to mod a loom and its not intergrated into teh vehicles loom, I just did that on a g13bb into an lj in an afternoon over a few beers and then stuck it back in the car for free cause it didnt seem like a big deal! I've thought the same a few times now. STill. its only $400 and I fucking hate wiring So does Dan especially when he's cronically hungover and teh engine is said to have correct cam timing etc BS!! You live for this shit!