xedent wrote:
well using a thermosat house from a swift i have about 10mm of room, and the dizzy model goes a lot farther then that.
http://auszookers.com/index.php?name=Fo ... ic&t=19365
| auszookers.com https://auszookers.com/forum/ |
|
| part description https://auszookers.com/forum/viewtopic.php?f=5&t=19372 |
Page 1 of 1 |
| Author: | russty_2008 [ Tue Feb 22, 2011 9:25 am ] |
| Post subject: | part description |
does anyone know what the proper name is for the part the radiator hose clamps onto on the back of a g16b |
|
| Author: | atari4x4 [ Tue Feb 22, 2011 9:26 am ] |
| Post subject: | Re: part description |
would it be the thermostat housing? |
|
| Author: | russty_2008 [ Tue Feb 22, 2011 9:37 am ] |
| Post subject: | Re: part description |
yes thats it had a mind blank will a vitara one bolt onto a baleno |
|
| Author: | atari4x4 [ Tue Feb 22, 2011 9:40 am ] |
| Post subject: | Re: part description |
NFI.... i don't know enough about sierra's, didn't someone post a pic of a thermostat housing in one of your other threads? |
|
| Author: | mondo [ Tue Feb 22, 2011 9:41 am ] |
| Post subject: | Re: part description |
na, i've got the same thing, but whereas the baleno engine has a thermostat housing, the vitara engine only has something that looks like a thermostat housing but doesnt house a thermostat. well i don't think it would |
|
| Author: | atari4x4 [ Tue Feb 22, 2011 9:43 am ] |
| Post subject: | Re: part description |
xedent wrote: well using a thermosat house from a swift i have about 10mm of room, and the dizzy model goes a lot farther then that.
http://auszookers.com/index.php?name=Fo ... ic&t=19365 |
|
| Author: | russty_2008 [ Tue Feb 22, 2011 9:56 am ] |
| Post subject: | Re: part description |
ha ha there i go again does anyone have one of these |
|
| Author: | atari4x4 [ Tue Feb 22, 2011 9:58 am ] |
| Post subject: | Re: part description |
it's the sort of part i would buy new... corrosion is a bitch. |
|
| Author: | tanshi [ Tue Feb 22, 2011 9:59 am ] |
| Post subject: | Re: part description |
i heard torana ones fit |
|
| Author: | 303zuke [ Tue Feb 22, 2011 10:02 am ] |
| Post subject: | Re: part description |
The Baleno/Swift has a hose outlet bolted to a thermostat body that bolts to the head, while the Vit (which has the thermostat in the Inlet Manifold) only has a hose outlet. Both of them mate to the head using the same gasket, 17699-60B01, so I would say they're interchangable. |
|
| Author: | Fatzook [ Tue Feb 22, 2011 10:05 am ] |
| Post subject: | Re: part description |
303zuke wrote: The Baleno/Swift has a hose outlet bolted to a thermostat body that bolts to the head, while the Vit (which has the thermostat in the Inlet Manifold) only has a hose outlet.
Both of them mate to the head using the same gasket, 17699-60B01, so I would say they're interchangable. Vitara eh? I'll check that tomorrow 
|
|
| Author: | royce [ Tue Feb 22, 2011 10:06 am ] |
| Post subject: | Re: part description |
mine has the heater hose like that pic, pain in the ass it is |
|
| Author: | russty_2008 [ Wed Feb 23, 2011 8:49 am ] |
| Post subject: | Re: part description |
dont spose anyone has any photos of a baleno engine in a sierra with the firewall cut out to fit the dizzy |
|
| Author: | mondo [ Wed Feb 23, 2011 8:55 am ] |
| Post subject: | Re: part description |
i think i remember reading somewhere of someone making a 90 degree dizzy drive like the vitara has. not sure if that was for the g13bb or the g16b baleno |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|