I didnt want to bodylift my old seirra for the sake of the engine, i went to the wreckers and found some rubber intake pipe of various vehicles and i cut the bonnet and put a small scoop on to cover it.
Chop
| auszookers.com https://auszookers.com/forum/ |
|
| body lift yes or no? https://auszookers.com/forum/viewtopic.php?f=5&t=19420 |
Page 1 of 1 |
| Author: | suzukilwb [ Thu Feb 24, 2011 1:32 am ] |
| Post subject: | body lift yes or no? |
so i am thinking if i should body lift or not? im going to be putting in a vit 1.6L carby motor and got a 1L bonnet. i have read around and some people have trouble with it hitting the bonnet so i thought a body lift would be the easy way out. then i can tummy tuck the tcase and im going to make a rear bar and rock sliders so if im going to body lift now would be the time what dose everyone think? |
|
| Author: | JrZook [ Thu Feb 24, 2011 1:35 am ] |
| Post subject: | Re: body lift yes or no? |
Surely there a way you can lower the engine mounts or sort out the carb hat/air box system to warrant no body lift. What about a 1.3 bonnet/? |
|
| Author: | 5ierra [ Thu Feb 24, 2011 1:52 am ] |
| Post subject: | Re: body lift yes or no? |
His royal highness Baron Steak_Knife told me to try these: http://www.lowrangeoffroad.com/suzuki/s ... ounts.html I'm looking at the same thing atm but with the 1.3L bonnet. |
|
| Author: | alien [ Thu Feb 24, 2011 2:38 am ] |
| Post subject: | Re: body lift yes or no? |
yup - don't bodylift it just for the sake of an engine... thats a huge change to COG thats completely unnecessary. |
|
| Author: | dono1 [ Thu Feb 24, 2011 2:48 am ] |
| Post subject: | Re: body lift yes or no? |
Is the engine clearance the only reason for the BL? I would say font do it just for that reason alone. But if you do you can tuck up the T case and gearbox as well as make room for larger tyres. My 2c's. Dono1. |
|
| Author: | shakes [ Thu Feb 24, 2011 2:53 am ] |
| Post subject: | Re: body lift yes or no? |
If you've got the skill's, patience and time to raise the floor and mount the engine lower. Then I'd head that way. Body lift does make alot of things alot easier with only a small change in COG and weakness of mounts etc. |
|
| Author: | Chop [ Thu Feb 24, 2011 5:10 am ] |
| Post subject: | Re: body lift yes or no? |
I didnt want to bodylift my old seirra for the sake of the engine, i went to the wreckers and found some rubber intake pipe of various vehicles and i cut the bonnet and put a small scoop on to cover it.
Chop |
|
| Author: | chris_mac [ Thu Feb 24, 2011 6:23 am ] |
| Post subject: | Re: body lift yes or no? |
i had that problem when i removed BL from my sierra. well i took grinder made 3 cuts, add some sides and front and made a sort of scoop. air filter (swaped for sierra one) doesn't hit bonnet any more. whether it looks good or not, is not my concern, but it was cheap and easy to do it. |
|
| Author: | suzukilwb [ Thu Feb 24, 2011 2:46 pm ] |
| Post subject: | Re: body lift yes or no? |
cheers for the help so far guys 1reason for the BL idea is the motor swop but cos im thinking of making bar work and shook hoops for my ruf i dont wont to make it then BL if later. then have to change all the bar work. i am running 30x9.5s and wanna go to 31s later so there is a few reasons why im thinking about doing it |
|
| Author: | suzukilwb [ Thu Feb 24, 2011 2:49 pm ] |
| Post subject: | Re: body lift yes or no? |
JrZook wrote: Surely there a way you can lower the engine mounts or sort out the carb hat/air box system to warrant no body lift. What about a 1.3 bonnet/?
i have thought that but when i was spraying my zook not long ago i tryed that with the 1;3L bonnet i have sitting there it didnt wanna fit but i didnt try that hard 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|