| auszookers.com https://auszookers.com/forum/ |
|
| 1ltr transfer case https://auszookers.com/forum/viewtopic.php?f=5&t=19447 |
Page 1 of 1 |
| Author: | SierraDan [ Thu Feb 24, 2011 7:11 pm ] |
| Post subject: | 1ltr transfer case |
If it has a speedo cable is it the one I want to bolt into my 95 Sierra for a reduction? Cheers |
|
| Author: | 303zuke [ Thu Feb 24, 2011 7:23 pm ] |
| Post subject: | Re: 1ltr transfer case |
All versions of Sierra (and LJ!) transfer cases have the speedo cable coming off the back of the case. The type of 1.0 t/case you want for reduction AND to be able to swap flanges to fit a W/T has a light switch just in front of the shift lever. You can see it easily when the case is sitting on the ground, but you can also feel for it if it is still in the vehicle. |
|
| Author: | neofitou [ Thu Feb 24, 2011 9:45 pm ] |
| Post subject: | Re: 1ltr transfer case |
If you get the 1L transfer case with no light you need to change the flanges on the ends of the drive shafts using half half unis, not the transfer case, and you do need to change the speedo cable too.
The one on the left is a 1.3NT with 6.5s and the one on the right is the no light 1L. |
|
| Author: | SierraDan [ Thu Feb 24, 2011 11:15 pm ] |
| Post subject: | Re: 1ltr transfer case |
Yeah righto. This one looks to have something in front of the shifter. So me thinks it's the right one. Are the one with the light a straight bolt on job with a flange exchange? |
|
| Author: | neofitou [ Fri Feb 25, 2011 1:21 am ] |
| Post subject: | Re: 1ltr transfer case |
Yep, the ones on the transfer case. You will need a 27mm (i think) socket, a thin center punch to tap out the pinch an a whopping great breaker bar to undo the nuts |
|
| Author: | shep [ Fri Feb 25, 2011 1:32 am ] |
| Post subject: | Re: 1ltr transfer case |
this is the correct 1.0 jobbie.
|
|
| Author: | tanshi [ Fri Feb 25, 2011 1:39 am ] |
| Post subject: | Re: 1ltr transfer case |
yep that looks like the one. |
|
| Author: | jungas [ Fri Feb 25, 2011 1:59 am ] |
| Post subject: | Re: 1ltr transfer case |
Anyone got a 1lt with the light they wanna sell ?? |
|
| Author: | Gwagensteve [ Fri Feb 25, 2011 5:59 am ] |
| Post subject: | Re: 1ltr transfer case |
Jungas - it looks like you have about 31" tyres. I'm not sure a shift light case is the best answer. They are worth good money ( about $400 in the trade) because of the lower gearing.... but a set of 6.5 transfer gears is about $600.. and that includes most of a transfer rebuild. I reckoned I'd want to put gears in the shift light case pretty soon anywaym so spending more money on the 1.0 case would be a waste. Steve. |
|
| Author: | mrw82 [ Fri Feb 25, 2011 6:56 am ] |
| Post subject: | Re: 1ltr transfer case |
Gwagensteve wrote: They are worth good money ( about $400 in the trade)
WHAT TRADE IS THAT!!!!! |
|
| Author: | Gwagensteve [ Fri Feb 25, 2011 7:02 am ] |
| Post subject: | Re: 1ltr transfer case |
Wring a wrecker and ask.... Steve. |
|
| Author: | Richo [ Fri Feb 25, 2011 8:19 am ] |
| Post subject: | Re: 1ltr transfer case |
jungas wrote: Anyone got a 1lt with the light they wanna sell ??
yep but i'm in Perth Richo |
|
| Author: | neofitou [ Fri Feb 25, 2011 8:46 am ] |
| Post subject: | Re: 1ltr transfer case |
Both you guys are wrong! It's somewhere in between! I sold my 1l no light for $200.. |
|
| Author: | SierraDan [ Thu Mar 03, 2011 11:17 pm ] |
| Post subject: | Re: 1ltr transfer case |
Bought mine for $50 |
|
| Author: | 2stroker [ Fri Mar 04, 2011 12:42 pm ] |
| Post subject: | Re: 1ltr transfer case |
To say they are worth this or that is nonsence, basicly they are worth whatever someone will pay for them. |
|
| Author: | shep [ Fri Mar 04, 2011 12:47 pm ] |
| Post subject: | Re: 1ltr transfer case |
i payed 200 for one on ebay and i have also found one at the dump |
|
| Author: | 2stroker [ Sat Mar 05, 2011 9:33 pm ] |
| Post subject: | Re: 1ltr transfer case |
shep wrote: i payed 200 for one on ebay and i have also found one at the dump
That is the perfect example shep, so you could say they worth $200 or worth nothing? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|