auszookers.com • View topic - Spinning bolt !!!

Board index » Talking About Stuff » Suzuki Talk

Spinning bolt !!!

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Zooknoob

Joined: Sat Jan 08, 2011 11:02 pm
Posts: 94
Location: Perth, WA

Posted: Sun Feb 27, 2011 12:35 am

Hey I'm trying to take my front bar off but but the 4 bolts that are holding the bracket on are just spinning and there's no room to get anything inside to hold the other side in to stop spinning an 1 have and ideas on how the get them off or how to snap them off

Benz

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 1006
Location: Cervantes WA

Posted: Sun Feb 27, 2011 12:42 am

angel grinder?

Zooknoob

Joined: Sat Jan 08, 2011 11:02 pm
Posts: 94
Location: Perth, WA

Posted: Sun Feb 27, 2011 12:48 am

Yer I was thinking that but to no room to get it in under the chase

shakes

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Posted: Sun Feb 27, 2011 2:06 am

A big flat head screw driver is often enough to place against the nut and lever back onto something to jam it to hold it.

Take a couple photo's for us, might help

Teracis

Joined: Sat Dec 11, 2010 10:03 pm
Posts: 2261
Location: Gold Coast
Vehicle: Daisy

Posted: Sun Feb 27, 2011 2:43 am

Or a hacksaw blade (or reciprocating saw/sabre saw if you have one) to cut them off.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sun Feb 27, 2011 7:23 am

shakes wrote:

A big flat head screw driver is often enough to place against the nut and lever back onto something to jam it to hold it.

Take a couple photo's for us, might help

or hammer & cold chisel... :twisted:

_________________
I used to be indecisive,
now I'm not so sure.....

bazook

az supporter

Joined: Sat Jul 12, 2008 11:30 pm
Posts: 1082
Location: brisbane logan

Posted: Sun Feb 27, 2011 7:52 am

or oxy, or if you can get vice grips on it you could just wiggle it up and down

_________________
josh AKA Bazook

Taylor74

Joined: Fri Dec 24, 2010 10:26 am
Posts: 198
Location: Perth WA

Posted: Mon Feb 28, 2011 8:24 am

I do love my plasma cutter

_________________
Suzuki is my way of life.

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Mon Feb 28, 2011 8:45 am

steak_knife wrote:

shakes wrote:

A big flat head screw driver is often enough to place against the nut and lever back onto something to jam it to hold it.

Take a couple photo's for us, might help

or hammer & cold chisel... :twisted:

Yeah, big hammer, big sharp chisel. Just don't hit ya hand :wink:

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Feb 28, 2011 9:08 am

ScrawnC wrote:

steak_knife wrote:

shakes wrote:

A big flat head screw driver is often enough to place against the nut and lever back onto something to jam it to hold it.

Take a couple photo's for us, might help

or hammer & cold chisel... :twisted:

Yeah, big hammer, big sharp chisel. Just don't hit ya hand :wink:

That's what I'm doing wrong.... :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Mon Feb 28, 2011 9:10 am

steak_knife wrote:

ScrawnC wrote:

steak_knife wrote:

shakes wrote:

A big flat head screw driver is often enough to place against the nut and lever back onto something to jam it to hold it.

Take a couple photo's for us, might help

or hammer & cold chisel... :twisted:

Yeah, big hammer, big sharp chisel. Just don't hit ya hand :wink:

That's what I'm doing wrong.... :roll:

I use a cast iron fry pan, seem to have better success

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 266 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum