i must admit im a little confused as i currently have standard rears in the front (pretty sagged) which leaves the front 10mm higher than the back (2" ome rears load leaf and 1 leaf removed)

i would have thought even with those removed they would be a bit higher than std rears?

Ivebeen looking at either the Calmini 3" or the Efs 65mm however I've asked a few shops and they dont stock either so am thinking ill see what the states have to offer..

Any chance you know a store that carried the efs 65mms?

hey guys,after extensive trawling through other threads im actually unable to find if you need 4 of the same springs?

some threads say they use standard rears in the front and 2" lifted springs in the back,others say 2" lifted rears all round.

is anybody able to shed some light on this for me?i have remounted the hangars and extended the chassis so that the distance between both mounts on the front is 980 (the back is apparently 985) and want to get a lift all around that will leave it sitting nice and high and level.

there are a few over here in wa,suzistore midland is probably most common.

yea red tried but even with that one removed they are an impossibly tough ride im finding. been hoping to find a suitable replacement that doesnt feel like my back is going to break over every speed bump.shackle angle at the bqack is good too,have already checked that,changed springs to standard rears,far far nicer for comfort but around 2 1/2" too low lol

i run 20psi all round red,atm its very comfortable for a sierra,just meant with the ome's i found it pretty harsh.

ah mine is sitting lower at the back with chassis extension and standard shackles with a good shackle angle.

does anyone have any experience with the westcoast suspension 2" springs?