Somewhat ironic that your golf has a golf ball finish.....
| auszookers.com https://auszookers.com/forum/ |
|
| Dent removal https://auszookers.com/forum/viewtopic.php?f=5&t=19669 |
Page 1 of 1 |
| Author: | Marked [ Thu Mar 03, 2011 7:59 am ] |
| Post subject: | Dent removal |
anyone tried this? paper man threw heavy paper and let three small dents on my GV http://www.youtube.com/watch?v=q0UAUBE-Hmg |
|
| Author: | BlueSuzy [ Thu Mar 03, 2011 8:04 am ] |
| Post subject: | Re: Dent removal |
Throw paper back at paper man? With a brick? Jeez! Where is the dint? Easy access? |
|
| Author: | monley [ Thu Mar 03, 2011 8:13 am ] |
| Post subject: | Re: Dent removal |
mhh... how long would it take me to get all the hail dents out of my jimny... cool tho! |
|
| Author: | Marked [ Thu Mar 03, 2011 8:23 am ] |
| Post subject: | Re: Dent removal |
on bonnet, cant get under them to push out though...I dont think |
|
| Author: | Choppy [ Thu Mar 03, 2011 9:20 am ] |
| Post subject: | Re: Dent removal |
monkey wrote: mhh... how long would it take me to get all the hail dents out of my jimny...
cool tho! if you actually do, use a paintless dent repairer, much cheaper then a panel shop |
|
| Author: | lump_a_charcoal [ Thu Mar 03, 2011 5:57 pm ] |
| Post subject: | Re: Dent removal |
My golf is in having all the pock marks removed by a hail damage mob - Will be interesting to see how effective they are. |
|
| Author: | kirstyandgrace [ Thu Mar 03, 2011 11:05 pm ] |
| Post subject: | Re: Dent removal |
Somewhat ironic that your golf has a golf ball finish.....
|
|
| Author: | Mr_T [ Thu Mar 03, 2011 11:14 pm ] |
| Post subject: | Re: Dent removal |
You'll be surprised how expensive those dent removers will charge you. The panel shop I used to work at used to get charged $150 a dent. That's right $150 what a thief he was. |
|
| Author: | lump_a_charcoal [ Fri Mar 04, 2011 12:20 am ] |
| Post subject: | Re: Dent removal |
kirstyandgrace wrote: Somewhat ironic that your golf has a golf ball finish.....
The irony is not lost on me! 
Seriously though, it does fly longer and straighter! |
|
| Author: | carlos83 [ Fri Mar 04, 2011 1:40 am ] |
| Post subject: | Re: Dent removal |
I've done something similar with dry-ice and it worked a treat on a small dent on the jimny. Same principle, it frezzes it, the metal contract and pops the dent out. Its not great for hail dents though, as they often deform the body work and paint, this is best for rounded, shallow dents, rather that small deep ones like with hail. |
|
| Author: | monley [ Fri Mar 04, 2011 7:57 am ] |
| Post subject: | Re: Dent removal |
$1000 bucks to get all the dent out on one side, plus a new bonnet another what about $350 non genuine, then the issue of the roof, then the dents you can't get out, then the re-spray. Not worth in IMO maybe just a new hood for me
|
|
| Author: | ajsr [ Fri Mar 04, 2011 9:27 pm ] |
| Post subject: | Re: Dent removal |
it will only work if the metal has not streched. once strech has happened even if you pop the dent it will leave a ridge high or low. liquid lpg works well too |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|