| auszookers.com https://auszookers.com/forum/ |
|
| High beams stuck on https://auszookers.com/forum/viewtopic.php?f=5&t=19689 |
Page 1 of 1 |
| Author: | stewy91 [ Fri Mar 04, 2011 4:29 am ] |
| Post subject: | High beams stuck on |
hey guys was just wondering what this could be caused from i haven't played with any wires or anything and i can not turn them off had to disconnect battery |
|
| Author: | royce [ Fri Mar 04, 2011 4:31 am ] |
| Post subject: | Re: High beams stuck on |
fuse box under the dash, top row, 3rd or 4th fuse from teh left |
|
| Author: | stewy91 [ Fri Mar 04, 2011 4:36 am ] |
| Post subject: | Re: High beams stuck on |
okay so tried them two didn't go off so i pulled them all and still on but the 5th one from the left was a Little bit melted |
|
| Author: | stewy91 [ Fri Mar 04, 2011 5:51 am ] |
| Post subject: | Re: High beams stuck on |
does anyone know what this could be? |
|
| Author: | steve [ Fri Mar 04, 2011 6:00 am ] |
| Post subject: | Re: High beams stuck on |
How about flicking the higbeam lever backwards and forwards , like the contacts could be stuck on? |
|
| Author: | Ben_Sierra [ Fri Mar 04, 2011 6:01 am ] |
| Post subject: | Re: High beams stuck on |
fuse box under the dash, top row, 3rd or 4th fuse from teh left.. You need to replace it, not just pull it... |
|
| Author: | stewy91 [ Fri Mar 04, 2011 6:04 am ] |
| Post subject: | Re: High beams stuck on |
tried it several time was thinking about just cutting the wire from the column or from the back of the headlight but wasn't too sure whether it could cause drainage problems. and ben I just figured since it had no fuse they wouldn't work but when this rain stops i will replace them both |
|
| Author: | steak_knife [ Fri Mar 04, 2011 7:11 am ] |
| Post subject: | Re: High beams stuck on |
royce wrote: fuse box under the dash, top row, 3rd or 4th fuse from teh left stewy91 wrote: tried it several time was thinking about just cutting the wire from the column or from the back of the headlight but wasn't too sure whether it could cause drainage problems. and ben I just figured since it had no fuse they wouldn't work but when this rain stops i will replace them both
doesn't work like that, a blown fuse is technically not there, as there is a break circuit once the fuse is blown.. That & Mr Suzuki was on acid when he designed the sierra harness.. :stekky: |
|
| Author: | stewy91 [ Fri Mar 04, 2011 7:19 am ] |
| Post subject: | Re: High beams stuck on |
okay so put new fuses in and still no luck still on and now i have a dead battery to go with it so any other suggestions i don't use high beam anyway so it doesn't bother me if i cant use it again. |
|
| Author: | steak_knife [ Fri Mar 04, 2011 8:01 am ] |
| Post subject: | Re: High beams stuck on |
is the fuse still good?? or has it blown?? |
|
| Author: | stewy91 [ Fri Mar 04, 2011 8:08 am ] |
| Post subject: | Re: High beams stuck on |
they were still good but the 5th one had melted a little |
|
| Author: | steak_knife [ Fri Mar 04, 2011 8:11 am ] |
| Post subject: | Re: High beams stuck on |
stewy91 wrote: they were still good but the 5th one had melted a little
The new one's??? If the fuse is blown again, unplug all tail & parker light's, replace blown fuse & plug the light's back in one by one, checking the fuse each time, when you plug one in & it blow's the fuse you have found the circuit with the fault.. |
|
| Author: | shep [ Fri Mar 04, 2011 8:26 am ] |
| Post subject: | Re: High beams stuck on |
here is another one for ya steekkyy whenever it rains my wipers auto come on and stay on until the key is turned off, even if the wipers aren't actually turned on. |
|
| Author: | steak_knife [ Fri Mar 04, 2011 8:28 am ] |
| Post subject: | Re: High beams stuck on |
shep wrote: here is another one for ya steekkyy
whenever it rains my wipers auto come on and stay on until the key is turned off, even if the wipers aren't actually turned on. People pay to have option's like that... do you get water on the passenger floor?? |
|
| Author: | stewy91 [ Fri Mar 04, 2011 8:30 am ] |
| Post subject: | Re: High beams stuck on |
not the new ones the new fuses i put in are fine so were the old ones it was only the 5th across that was melted i just replaced them to be sure. |
|
| Author: | shep [ Fri Mar 04, 2011 8:33 am ] |
| Post subject: | Re: High beams stuck on |
steak_knife wrote: shep wrote: here is another one for ya steekkyy whenever it rains my wipers auto come on and stay on until the key is turned off, even if the wipers aren't actually turned on. People pay to have option's like that... do you get water on the passenger floor?? get water everywhere, even in the glove box |
|
| Author: | steak_knife [ Fri Mar 04, 2011 8:36 am ] |
| Post subject: | Re: High beams stuck on |
| Author: | shep [ Fri Mar 04, 2011 8:38 am ] |
| Post subject: | Re: High beams stuck on |
steak_knife wrote: 8O But your glove's will get wet!!!!
narh i only keep spare (well leftover) bolts in there |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|