auszookers.com
https://auszookers.com/forum/

1600 oil pickup
https://auszookers.com/forum/viewtopic.php?f=5&t=1977		 Page 1 of 1
Author:  Damo [ Wed Apr 16, 2008 1:09 am ]
Post subject:  1600 oil pickup
Went to put my sump on tonight and am a bit lost with my oil pickup.

There is about 2mm between the block and the pickup tube. When I pulled it apart this gap was filled with silicon :roll: but i'm guessing it should be an o-ring. Is this what it's supposed to look like? I'm hoping an off the shelf o-ring will work.

Image
Author:  Scrawny [ Wed Apr 16, 2008 1:51 am ]
Post subject:  Re: 1600 oil pickup
I'm just guesing here but looks to me like a 2mm o-ring will sit down nice and neat in that recess. There is even a chamfer to help it in.
Author:  sp1086 [ Wed Apr 16, 2008 4:45 am ]
Post subject:  Re: 1600 oil pickup
YEah the rubber O ring is missing..
Author:  Damo [ Wed Apr 16, 2008 5:42 am ]
Post subject:  Re: 1600 oil pickup
I'll see if I can get one tomorrow. Err, make that today.

I'm still a bit amazed about the silicon job that someone did on it. And if you saw how much they used to seal the sump... faaaark!
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/