Ok sweet
| auszookers.com https://auszookers.com/forum/ |
|
| QLD Exhaust system https://auszookers.com/forum/viewtopic.php?f=5&t=19813 |
Page 1 of 1 |
| Author: | ealfa [ Mon Mar 07, 2011 9:56 pm ] |
| Post subject: | QLD Exhaust system |
i want to upgrade the exhaust system. 2inch with extractors got quoted 580 all up is this cheap? Or wheres there best place to go ?? thanks |
|
| Author: | Hotshot993 [ Mon Mar 07, 2011 9:57 pm ] |
| Post subject: | Re: QLD Exhaust system |
That's good. I got quoted the same. Fatzook got it for me and really cheap. So that must be good |
|
| Author: | S13RR4 [ Mon Mar 07, 2011 10:00 pm ] |
| Post subject: | Re: QLD Exhaust system |
sounds better then the $900 + that some said they got quoted down south |
|
| Author: | ealfa [ Mon Mar 07, 2011 10:11 pm ] |
| Post subject: | Re: QLD Exhaust system |
Ok sweet
|
|
| Author: | zooky08 [ Mon Mar 07, 2011 10:56 pm ] |
| Post subject: | Re: QLD Exhaust system |
I got quoted $460 for two length of 2inch exaust From extractors to cat and from cat to muffler So $580 is a good price |
|
| Author: | brodie03 [ Mon Mar 07, 2011 11:10 pm ] |
| Post subject: | Re: QLD Exhaust system |
I went over to Exotic Exhausts in Sumner Park (westside of Brisbane) before the floods and spoke to them about putting about 1.75 inch extractors and a 2inch exhaust system through my car. Wasn't a full quote ie, piece of paper with full costings, but the boss said I would be looking at around $400. They could be worth a shot, I am unsure whether they are up and running again yet, as I am assuming that they went under. |
|
| Author: | matfan [ Tue Mar 08, 2011 12:00 am ] |
| Post subject: | Re: QLD Exhaust system |
ealfa wrote: i want to upgrade the exhaust system. 2inch with extractors got quoted 580 all up is this cheap?
Or wheres there best place to go ?? thanks Where was this quote from? Sounds good. |
|
| Author: | ealfa [ Tue Mar 08, 2011 12:22 am ] |
| Post subject: | Re: QLD Exhaust system |
Moss st right price |
|
| Author: | luke4130 [ Tue Mar 08, 2011 7:21 am ] |
| Post subject: | Re: QLD Exhaust system |
Exotic Exhaust didn't go under (only just). Used to work next door and all I can say is that their custom headers are works of art. I never thought they'd be cheap as the saying goes "you get what you pay for". All i can say is that if your happy with a price from them, then I'd go for it. Their quality is right up the top.. IMOHO, Luke. |
|
| Author: | whincup [ Tue Mar 08, 2011 7:38 am ] |
| Post subject: | Re: QLD Exhaust system |
well place up here charged me $380 for extractors, and gave me a quote of $420 for mandrel bent 2" plus a high flow cat. i'd say thats a good price for a full system. |
|
| Author: | monley [ Tue Mar 08, 2011 8:30 am ] |
| Post subject: | Re: QLD Exhaust system |
Do any of you's put bellows in your exhaust systems? |
|
| Author: | stiky [ Tue Mar 08, 2011 8:38 am ] |
| Post subject: | Re: QLD Exhaust system |
Bellow??? |
|
| Author: | alien [ Tue Mar 08, 2011 8:38 am ] |
| Post subject: | Re: QLD Exhaust system |
doubtful... suzistore have a sierra in there right now (project car) that running a 1.6 and extractors to no pipe (its not fitted yet) and it still sounds quieter than most motorbikes on the road today =P |
|
| Author: | monley [ Tue Mar 08, 2011 8:43 am ] |
| Post subject: | Re: QLD Exhaust system |
stiky wrote: Bellow???
It goes in as part of the exhaust, it a wire mesh thing about 80mm long and allows the exhaust to move around a bit more to put less strain on the rubbers, also helps prevent welds cracking. I'll post are pic of mine. |
|
| Author: | ealfa [ Tue Mar 08, 2011 8:43 am ] |
| Post subject: | Re: QLD Exhaust system |
i had that on my old car not sure if they do it for the vit |
|
| Author: | monley [ Tue Mar 08, 2011 9:03 am ] |
| Post subject: | Re: QLD Exhaust system |
Thats a bellow, i would recommend putting one on any 4wd. |
|
| Author: | ZookiMonsta [ Tue Mar 08, 2011 10:09 am ] |
| Post subject: | Re: QLD Exhaust system |
alien wrote: doubtful...
suzistore have a sierra in there right now (project car) that running a 1.6 and extractors to no pipe (its not fitted yet) and it still sounds quieter than most motorbikes on the road today =P I started mine up with nothing but extractors... my friends from 4houses down rang up and wanted to know if they could come check out the drag car 
|
|
| Author: | atari4x4 [ Tue Mar 08, 2011 10:20 am ] |
| Post subject: | Re: QLD Exhaust system |
monkey wrote: stiky wrote: Bellow??? It goes in as part of the exhaust, it a wire mesh thing about 80mm long and allows the exhaust to move around a bit more to put less strain on the rubbers, also helps prevent welds cracking. I'll post are pic of mine. flex joint. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|