auszookers.com
https://auszookers.com/forum/

Some last min Advice on Falcon alternator install
https://auszookers.com/forum/viewtopic.php?f=5&t=19823		 Page 1 of 1
Author:  TryHard [ Tue Mar 08, 2011 9:12 am ]
Post subject:  Some last min Advice on Falcon alternator install
hey guys my zook alternator died so i have decided to put in a Falcon one .. i have a EF one sitting at home but as i found out its a boash and will not fit ..

anyways i can get my hands on a EA or EL falcon alternator for free no probs with that

my Question is what pullys should i use .. should i just use the crank pully from a Vit and the water pump pully .. if so what year vit

... also i read that u need to redril the vit pully ? ..

also when i take the alternator do i need the plug .. ?

any advice would be very helpfull thanks ..
Author:  want33s [ Tue Mar 08, 2011 9:40 am ]
Post subject:  Re: Some last min Advice on Falcon alternator install
EA is different.
EL will work as long as it's Mitsubishi.
Leave the alt pulley alone and fit Vit or Swift/Barina pulleys to water pump and crank.
Get the ford plug and a bit of wire if you want it tidy...

Isn't there enough threads about all this already?
Author:  TryHard [ Tue Mar 08, 2011 9:59 am ]
Post subject:  Re: Some last min Advice on Falcon alternator install
want33s wrote:
EA is different.
EL will work as long as it's Mitsubishi.
Leave the alt pulley alone and fit Vit or Swift/Barina pulleys to water pump and crank.
Get the ford plug and a bit of wire if you want it tidy...

Isn't there enough threads about all this already?


yes there is i was just checking i had it right thanks mate :)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/