| auszookers.com https://auszookers.com/forum/ |
|
| Replacing Cv boot https://auszookers.com/forum/viewtopic.php?f=5&t=19848 |
Page 1 of 1 |
| Author: | ealfa [ Wed Mar 09, 2011 4:33 am ] |
| Post subject: | Replacing Cv boot |
is it hard to replace a cv boot on a vitara 1.6 swb? do i need special tools |
|
| Author: | royce [ Wed Mar 09, 2011 4:41 am ] |
| Post subject: | Re: Replacing Cv boot |
http://www.auszookers.com/index.php?nam ... tara++boot http://auszookers.com/index.php?name=Fo ... ic&t=12265 You need a jack and stands allen key to get the free wheeling hub off circlip pliers to get the driveshaft clip out 12mm spanner to get inner joint off (if passenger side) 17mm socket and spanner to get lower strut bolts off if drivers side sidecutters to get old boot clips off circlip pliers to get inner joint retainer off |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|