| auszookers.com https://auszookers.com/forum/ |
|
| Rear seat mount holes. What size bolt? https://auszookers.com/forum/viewtopic.php?f=5&t=19871 |
Page 1 of 1 |
| Author: | SierraDan [ Thu Mar 10, 2011 2:18 am ] |
| Post subject: | Rear seat mount holes. What size bolt? |
The four holes in the floor of my soft top for the front mounts of the rear seats didn't come with seats/bolts. Just wondering if anybody knows the correct size/thread these bolts are. Cheers. |
|
| Author: | royce [ Thu Mar 10, 2011 2:20 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
M8 |
|
| Author: | want33s [ Thu Mar 10, 2011 2:45 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
M8X1.5 |
|
| Author: | 2stroker [ Thu Mar 10, 2011 4:28 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
M8X1.5, with a hex head |
|
| Author: | Ben_Sierra [ Thu Mar 10, 2011 5:01 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
M8X1.5, with a hex head, grade 8.8 High Tensile |
|
| Author: | royce [ Thu Mar 10, 2011 5:14 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
want33s wrote: M8X1.5
No such thing 
M8 is correct, M8 means it is standard pitch of 1.25 http://en.wikipedia.org/wiki/ISO_metric_screw_thread If I had said M8 fine it would be 1.00 pitch you other pair going on about head and grade, means nothing to a what size is it enquiry 
|
|
| Author: | appsie [ Thu Mar 10, 2011 6:15 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
nope it doesnt,but it sure does look good having all this tech 
x2 on the 1.25 m8 stuff |
|
| Author: | abclarke [ Thu Mar 10, 2011 6:44 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
No one mentioned how liong
|
|
| Author: | 2stroker [ Thu Mar 10, 2011 7:29 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
Yeah my terminology was wrong M8X1.5 usually means size and the pitch as Royce pointed out, The length of the thread is 1.5 
And the original bolts are hex head not flat phillips like you find all over the suzuki's 
|
|
| Author: | want33s [ Thu Mar 10, 2011 8:19 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
royce wrote: want33s wrote: M8X1.5 No such thing M8 is correct, M8 means it is standard pitch of 1.25 http://en.wikipedia.org/wiki/ISO_metric_screw_thread If I had said M8 fine it would be 1.00 pitch My mistake I should have said X1.25..... X1.5 is available but rare in M8. |
|
| Author: | SierraDan [ Thu Mar 10, 2011 8:39 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
I grabbed some M8x30mm(length) high tensile bolt. Perfect fit, thanks boys! |
|
| Author: | abclarke [ Thu Mar 10, 2011 9:11 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
SierraDan wrote: I grabbed some M8x30mm(length) high tensile bolt. Perfect fit, thanks boys!
Where abouts did you get your seats mate? Somewhere local? |
|
| Author: | SierraDan [ Thu Mar 10, 2011 9:14 am ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
The guy I bought the car off got them from somewhere, just chucked them in the back. But I'm using the factory holes to mount my toolbox. |
|
| Author: | SierraDan [ Thu Mar 10, 2011 5:39 pm ] |
| Post subject: | Re: Rear seat mount holes. What size bolt? |
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|