Taylor74 wrote:
Just put a relay in the system to make the starter work properly.
Cheaper and easier
Cheaper and easier
| auszookers.com https://auszookers.com/forum/ |
|
| !%^@&$ sierra ignition barrel screw! https://auszookers.com/forum/viewtopic.php?f=5&t=20042 |
Page 1 of 1 |
| Author: | alien [ Tue Mar 15, 2011 9:25 am ] |
| Post subject: | !%^@&$ sierra ignition barrel screw! |
Anyone know how to undo the little screw at the back of the ignition module? i dont have a single screw driver that fits in the space! even using the screwdriver head from a socket set and an adjustable spanner to grip it can't move the bastard... i'm trying to diagnose why after replacing my starter motor i'm still getting the solenoid clicking but no turnover of the starter - theory being its not getting enough power to hit it hard enough every time. |
|
| Author: | Taylor74 [ Tue Mar 15, 2011 9:35 am ] |
| Post subject: | Re: !%^@&$ sierra ignition barrel screw! |
Just put a relay in the system to make the starter work properly. Cheaper and easier |
|
| Author: | inbits [ Tue Mar 15, 2011 9:36 am ] |
| Post subject: | Re: !%^@&$ sierra ignition barrel screw! |
Are you talking about a screw that holds the plug in or that hold the barrel to the column? |
|
| Author: | boostedbrick [ Tue Mar 15, 2011 9:37 am ] |
| Post subject: | Re: !%^@&$ sierra ignition barrel screw! |
alien wrote: Anyone know how to undo the little screw at the back of the ignition module? i dont have a single screw driver that fits in the space! even using the screwdriver head from a socket set and an adjustable spanner to grip it can't move the bastard...
i'm trying to diagnose why after replacing my starter motor i'm still getting the solenoid clicking but no turnover of the starter - theory being its not getting enough power to hit it hard enough every time. You running the clicky starter fix? I replaced the 4guage positive to the starter aswell as mine had corroded on one end, and the other was somewhat rusty.. |
|
| Author: | steak_knife [ Tue Mar 15, 2011 9:38 am ] |
| Post subject: | Re: !%^@&$ sierra ignition barrel screw! |
Taylor74 wrote: Just put a relay in the system to make the starter work properly.
Cheaper and easier
|
|
| Author: | alien [ Tue Mar 15, 2011 9:48 am ] |
| Post subject: | Re: !%^@&$ sierra ignition barrel screw! |
i forgot about the clicky starter being common... rings a bell now! so relay and replace the wires for the ultimate fix? lol |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|