Thats the least of my worries, normally its coming through the doors and softtop...
I just remove the floor bungs and let the water out once I've gone through
| auszookers.com https://auszookers.com/forum/ |
|
| hows everyone sealing there handbrake lever? https://auszookers.com/forum/viewtopic.php?f=5&t=20046 |
Page 1 of 1 |
| Author: | wanazook [ Tue Mar 15, 2011 11:36 am ] |
| Post subject: | hows everyone sealing there handbrake lever? |
hi guys, went for a drive with some mates tonite, did a bit of creek crossing stuff... just wondering how you guys are sealing your handbrakes from letting any water into the cabin? mine pisses through like theres no tomorow... unless i'm missing a rubber of some sort maybe? |
|
| Author: | Ben_Sierra [ Tue Mar 15, 2011 11:46 am ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
Thats the least of my worries, normally its coming through the doors and softtop... I just remove the floor bungs and let the water out once I've gone through
|
|
| Author: | alien [ Tue Mar 15, 2011 12:01 pm ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
i have my floor plugs out in winter so i sink... if i leave them in the water doesnt come in fast enough and i float off the line i was on and lose momentum... lol |
|
| Author: | zook95 [ Tue Mar 15, 2011 6:51 pm ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
yerp thats a good idea alien |
|
| Author: | Damo [ Tue Mar 15, 2011 8:36 pm ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
wanazook wrote: hi guys, went for a drive with some mates tonite, did a bit of creek crossing stuff... just wondering how you guys are sealing your handbrakes from letting any water into the cabin? mine pisses through like theres no tomorow... unless i'm missing a rubber of some sort maybe?
There is a plate that bolts to the floor, this is what your lever is hinged on. Between that plate and the body should be a rubber seal, if that's missing it will most likely let in water like you describe. |
|
| Author: | ajsr [ Tue Mar 15, 2011 8:54 pm ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
alien wrote: i have my floor plugs out in winter so i sink... if i leave them in the water doesnt come in fast enough and i float off the line i was on and lose momentum... lol
what decade was that? it hasnt rained in WA for about 12 years has it? 
|
|
| Author: | alien [ Tue Mar 15, 2011 9:41 pm ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
you're not far off =P |
|
| Author: | wanazook [ Wed Mar 16, 2011 5:18 am ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
Damo wrote: wanazook wrote: hi guys, went for a drive with some mates tonite, did a bit of creek crossing stuff... just wondering how you guys are sealing your handbrakes from letting any water into the cabin? mine pisses through like theres no tomorow... unless i'm missing a rubber of some sort maybe? There is a plate that bolts to the floor, this is what your lever is hinged on. Between that plate and the body should be a rubber seal, if that's missing it will most likely let in water like you describe. true... so looks like i'm missing the rubber seal then.. as when i'm under the car i can see daylight through the handbrake lever mechanism quite easily...thanks for clearing that up 
|
|
| Author: | steak_knife [ Wed Mar 16, 2011 6:19 am ] |
| Post subject: | Re: hows everyone sealing there handbrake lever? |
alien wrote: i have my floor plugs out in winter so i sink... if i leave them in the water doesnt come in fast enough and i float off the line i was on and lose momentum... lol
Close to the reason mine are out, took em out cause it rained, forgot where I put em... 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|