auszookers.com
https://auszookers.com/forum/

seats
https://auszookers.com/forum/viewtopic.php?f=5&t=20068
Page 1 of 1

Author:  shaunosj40t [ Wed Mar 16, 2011 9:30 am ]
Post subject:  seats

:D hey guys

can you put sliding seats in a fixed seat 1981 sj40t sierra ute

Author:  zooky08 [ Wed Mar 16, 2011 9:42 am ]
Post subject:  Re: seats

You should be able to as long as you get it mod plated

Author:  Gwagensteve [ Wed Mar 16, 2011 9:43 am ]
Post subject:  Re: seats

Yes, driver's side seat rails from a "normal" sierra will bolt in on both the driver's and passenger's side of the ute.

However, are you 3 ft tall? :D almost nobody needs to move the stock seats forward and you can't move them back as they will hit the cab back.

You need to be careful what seats you try to use as you'll eat up legroom very quickly if the seats are thicker in the backrest than the stock ute seats.

I have run Sparco Sprint seats in my ute (fixed) and now run LS Recaro's, but they eat heavily into leg and head room.

Image

Image[/quote]

The Recaro's are on Recaro slides, but they are mounted as low as possible.

Steve.

Author:  Fatzook [ Wed Mar 16, 2011 9:44 am ]
Post subject:  Re: seats

shaunosj40t wrote:
:D hey guys

can you put sliding seats in a fixed seat 1981 sj40t sierra ute


Why? How frigin short are you? :lol:

Author:  shaunosj40t [ Wed Mar 16, 2011 9:47 am ]
Post subject:  Re: seats

no im not that short the fixed seats are the perfect place where they are i just have to get new seats for it
i didnt know if you could by fixed seats or wat thats all
the old rags over the spring trick was really starting to get annoying on my arse

but thanks for the help mate :D

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/