auszookers.com
https://auszookers.com/forum/

NT transfer into WT
https://auszookers.com/forum/viewtopic.php?f=5&t=20232		 Page 1 of 1
Author:  canberramav [ Tue Mar 22, 2011 1:17 am ]
Post subject:  NT transfer into WT
Hey

Can i use the NT transfer into a WT.?

ie take the handbrake drum off and change the flanges over using parts from my blown WT transfer case?
Will this make it the same as a WT transfer case?


Cheers
Author:  JrZook [ Tue Mar 22, 2011 1:23 am ]
Post subject:  Re: NT transfer into WT
Yes provided the nt case was a 1.3 case.
Author:  tanshi [ Tue Mar 22, 2011 1:24 am ]
Post subject:  Re: NT transfer into WT
JrZook wrote:
Yes provided the nt case was a 1.3 case.


or a one litre with 4x4 switch case. (though this would lower your gearing)
Author:  canberramav [ Tue Mar 22, 2011 1:45 am ]
Post subject:  Re: NT transfer into WT
Thanks guys

6.5s are going into it. Just never mucked around with a NT case before. It is out of a 1.3.
Author:  shep [ Tue Mar 22, 2011 1:51 am ]
Post subject:  Re: NT transfer into WT
you might have to grind out the case a bit more then a wt to fit the gears but the case is the same
Author:  zukmeista [ Tue Mar 22, 2011 4:21 am ]
Post subject:  Re: NT transfer into WT
shep wrote:
you might have to grind out the case a bit more then a wt to fit the gears but the case is the same

??? Please explain why? :?
Author:  neofitou [ Wed Mar 23, 2011 1:52 am ]
Post subject:  Re: NT transfer into WT
nah, I hardly had to grind any off mine at all. mines a 1.3L NT.
Author:  Fatzook [ Wed Mar 23, 2011 2:02 am ]
Post subject:  Re: NT transfer into WT
canberramav wrote:
Thanks guys

6.5s are going into it. Just never mucked around with a NT case before. It is out of a 1.3.


Let me know if you haven't seen them by friday :wink:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/