| auszookers.com https://auszookers.com/forum/ |
|
| sagy vitara doors https://auszookers.com/forum/viewtopic.php?f=5&t=20247 |
Page 1 of 1 |
| Author: | jesse_vit [ Tue Mar 22, 2011 7:57 am ] |
| Post subject: | sagy vitara doors |
hey guys the doors on my swb vitara have quite a bit of sag in them just wondering if you could get new bushings for the hinges or if any of you fellas had a way to fix it cheers jesse |
|
| Author: | SuziBlu [ Tue Mar 22, 2011 8:36 am ] |
| Post subject: | Re: sagy vitara doors |
Not closing properly ? Loosen the screws to the hinges, on the pillar, lift door to set it at right hight, do not overly loosen, they still need to be firm, or the flop about. Sometimes you need a really strong arm to set them at the right hight. |
|
| Author: | zukmeista [ Tue Mar 22, 2011 8:46 am ] |
| Post subject: | Re: sagy vitara doors |
SuziBlu wrote: Not closing properly ?
Loosen the screws to the hinges, on the pillar, lift door to set it at right hight, do not overly loosen, they still need to be firm, or the flop about. Sometimes you need a really strong arm to set them at the right hight. Having 2 people helps.
|
|
| Author: | atari4x4 [ Tue Mar 22, 2011 8:50 am ] |
| Post subject: | Re: sagy vitara doors |
zukmeista wrote: SuziBlu wrote: Not closing properly ? Loosen the screws to the hinges, on the pillar, lift door to set it at right hight, do not overly loosen, they still need to be firm, or the flop about. Sometimes you need a really strong arm to set them at the right hight. Having 2 people helps. ![]() bottle jack under the slightly ajar door will also do it, support door with bottle jack. loosen screws slightly jack door & then re tighten. |
|
| Author: | SuziBlu [ Tue Mar 22, 2011 8:59 am ] |
| Post subject: | Re: sagy vitara doors |
atari4x4 wrote: zukmeista wrote: SuziBlu wrote: Not closing properly ? Loosen the screws to the hinges, on the pillar, lift door to set it at right hight, do not overly loosen, they still need to be firm, or the flop about. Sometimes you need a really strong arm to set them at the right hight. Having 2 people helps. ![]() bottle jack under the slightly ajar door will also do it, support door with bottle jack. loosen screws slightly jack door & then re tighten. Yep to both, I have also put a block under the door, and used my full weight combined with small jumps to move doors, its a case of "if at first you don't succeed, get a bigger hammer' |
|
| Author: | jesse_vit [ Wed Mar 23, 2011 8:19 am ] |
| Post subject: | Re: sagy vitara doors |
its not that they shut fine just when theropen you can pick up the door and feel thwe play in them |
|
| Author: | Taylor74 [ Wed Mar 23, 2011 9:39 am ] |
| Post subject: | Re: sagy vitara doors |
You can not buy bushes to my knowledge only hinges. make sure the body is not cracked where the hinges bolt on see it more and more now days. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|