| auszookers.com https://auszookers.com/forum/ |
|
| How to check axle housing is straight? https://auszookers.com/forum/viewtopic.php?f=5&t=20268 |
Page 1 of 1 |
| Author: | Vash [ Tue Mar 22, 2011 8:03 pm ] |
| Post subject: | How to check axle housing is straight? |
Hi guys, I bought another complete Sierra axle & diff with everything for $150. but the steering arm is bent, and the reason i bought this one was because my current axle is bent because the camber is out on one front wheel. How do i check this is straight so i dont goto all the work of putting it on and its out again? Thanks 
|
|
| Author: | Reubs [ Tue Mar 22, 2011 9:14 pm ] |
| Post subject: | Re: How to check axle housing is straight? |
Vash wrote: How do i check this is straight so i dont goto all the work of putting it on and its out again?
Get a front and rear wheel alignment - just for a readout and the person doing the job should be able to determine if the axles are straight. |
|
| Author: | Vash [ Tue Mar 22, 2011 9:19 pm ] |
| Post subject: | Re: How to check axle housing is straight? |
Can they do that without the axle on the car? On a sierra, if the camber is out means the axle is bent, right? since its not adjustable. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|