that gives me an idea for another auction.
| auszookers.com https://auszookers.com/forum/ |
|
| 1ltr transfer, switch or no switch does it really matter? https://auszookers.com/forum/viewtopic.php?f=5&t=20280 |
Page 1 of 1 |
| Author: | lumpy_zook [ Wed Mar 23, 2011 2:09 am ] |
| Post subject: | 1ltr transfer, switch or no switch does it really matter? |
i know everyone says 'u need a switch type transfer case' but is that the only difference between a switch type and non switch type? if i wasnt bothered about whether or not my dash tells me im in 4wd, would i be able to use a non switch type transfer case in my 92 sierra? thanks. |
|
| Author: | royce [ Wed Mar 23, 2011 2:13 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
the switch is just the easy way to identify the desirable case the bits you cant see are all teh splines on the input and output shafts are the same as a 1.3 case so all your 1.3 flanges will fit straight on and you can use your original tail shafts the non switch one you need to adapt your shafts with strange unis and stuff, doable but not as nice |
|
| Author: | shep [ Wed Mar 23, 2011 2:19 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
that gives me an idea for another auction.
|
|
| Author: | lumpy_zook [ Wed Mar 23, 2011 2:26 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter |
aww... crap. no worries. thanks for that. continue the hunt for a switch type. another auction? you have some thing i require? 
|
|
| Author: | shakes [ Wed Mar 23, 2011 2:37 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
if you're mechanically minded and enjoy messing around ie. not being able to bolt in and go straight away, then I'd almost lean towards the non switched type as the price difference is huge! |
|
| Author: | lumpy_zook [ Wed Mar 23, 2011 2:49 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
i love messing with things.. just really wanted to know if it would fit with some love. im a fitter adult aprentice, and i was thinking of making a adaptor plate/tailshaft spacer, that acted like a wheel spacer, with one pcd to go onto the transfer case, and the right pcd for the wt tailshafts. would help out with me moving my diffs out too. (ruf and corolla springs) |
|
| Author: | neofitou [ Wed Mar 23, 2011 2:50 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
Interestinly, Suziworld and Suzistore both insist that the speedo cable is the same on all the 1L and 1.3L cases. But its NOT. You also need the speedo cable. The no light one has a gear that slots in the end and all the ones afterwards just have a slot. If you get the 1L no light case, 1.5 unis with the clips on the inside and 3 1l yokes to put them in, and the speedo cable. I say if you can get all that for $250 then go for it otherwise keep saving and get gears. 
you can just make out on the Jack shaft above the 1L yoke on the 1.3L drive shaft, the clips on the driveshaft are on the outside and you cant see the ones on the yoke as they are on the inside. |
|
| Author: | royce [ Wed Mar 23, 2011 2:54 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
neofitou wrote: Interestinly, Suziworld and Suzistore both insist that the speedo cable is the same on all the 1L and 1.3L cases.
But its NOT. You also need the speedo cable. The no light one has a gear that slots in the end and all the ones afterwards just have a slot. What? I had a 1.3 case in a non light 1 litre, cable fit fine? Also had a non light case in a WT, also fitted fine? Your description there is confusing me 
|
|
| Author: | shakes [ Wed Mar 23, 2011 3:00 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
there was a thread floating around with what was needed exactly along with photo's of how to disasemble the uni's.. I'm sure it was from foolsp33d but do you think i can find it 
|
|
| Author: | neofitou [ Wed Mar 23, 2011 3:13 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
royce wrote: What? I had a 1.3 case in a non light 1 litre, cable fit fine?
Also had a non light case in a WT, also fitted fine? Your description there is confusing me OK now IM confused. my case was definatly diferent. 100% certain. Maybe only some of them were like this!!!?? I assumed that they were the same till I picked mine up. |
|
| Author: | royce [ Wed Mar 23, 2011 3:19 am ] |
| Post subject: | Re: 1ltr transfer, switch or no switch does it really matter? |
are you talking about where the cable screws into teh side or where you undo the M6 bolt and slide the whole drive gear out? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|