I hope these help. I will be pulling mine out this weekend now I have some 4.8's.
I did try to load the 6mb PDF but it shut me out after 2mb even though it says 256mb for PDF's
| auszookers.com https://www.auszookers.com/forum/ |
|
| GV front diff removal https://www.auszookers.com/forum/viewtopic.php?f=5&t=20335 |
Page 1 of 1 |
| Author: | Built4thrashing [ Thu Mar 24, 2011 9:58 am ] |
| Post subject: | GV front diff removal |
Can anyone shed some light on how to remove the front diff ctr in a GV. It seems like the vac engagement is not allowing the ctr to pull out. Has anyone got a part copy of the workshop manual of a version that i can download for free? Cheers |
|
| Author: | atari4x4 [ Thu Mar 24, 2011 10:01 am ] |
| Post subject: | Re: GV front diff removal |
have you removed the passenger side axle? i think i have the workshop manuals at home... will have a look when i knock off soon. |
|
| Author: | gregdixon [ Thu Mar 24, 2011 10:20 am ] |
| Post subject: | Re: GV front diff removal |
I hope these help. I will be pulling mine out this weekend now I have some 4.8's. I did try to load the 6mb PDF but it shut me out after 2mb even though it says 256mb for PDF's
|
|
| Author: | shabz [ Thu Mar 24, 2011 11:12 am ] |
| Post subject: | Re: GV front diff removal |
GV manuals here - http://www.suzukiinfo.com/ On the left click on "Vitara/Sidekick/Tracker" The SQ series are the 9th one down, 61mb! |
|
| Author: | Built4thrashing [ Thu Mar 24, 2011 8:28 pm ] |
| Post subject: | Re: GV front diff removal |
Front diff it out of car and sitting on workbench. I'll look at downloads after work. Thanx |
|
| Author: | gregdixon [ Sat Mar 26, 2011 4:21 am ] |
| Post subject: | Re: GV front diff removal |
Just pulled mine out. The centre came straight out. I just held the assembly by the drive flange then tapped the little tab on the housing, once the sealant broke free it came straight out. I did find I broke my circlip holding in the drivers cv  not sure whether it was when i put it in last time or when I just took it out? .
|
|
| Author: | Built4thrashing [ Sat Mar 26, 2011 6:50 am ] |
| Post subject: | Re: GV front diff removal |
Yeh i did tyhe same. But it was well glued in. Took quite a beating to tap it out. All done now. just waiting for my 4.8's to arrive. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|