auszookers.com
https://auszookers.com/forum/

Seat belts
https://auszookers.com/forum/viewtopic.php?f=5&t=20659
Page 1 of 1

Author:  joel88 [ Mon Apr 04, 2011 6:22 am ]
Post subject:  Seat belts

Hi guys

Need to put seat belts in my zook but don't want the standard ones what are they easiest ones that will fit in without to much modifying...

Thanks joel

Author:  Built4thrashing [ Mon Apr 04, 2011 6:23 am ]
Post subject:  Re: Seat belts

what zook? NT or WT sierra, Vit or GV? front or rear?

Author:  joel88 [ Mon Apr 04, 2011 6:35 am ]
Post subject:  Re: Seat belts

Lol sorry should have put more info NT sierra lwb in the front but I also have bucket seats

Author:  Built4thrashing [ Mon Apr 04, 2011 6:38 am ]
Post subject:  Re: Seat belts

Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.

Author:  steak_knife [ Mon Apr 04, 2011 6:44 am ]
Post subject:  Re: Seat belts

Built4thrashing wrote:
Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.


Not 100% true, you can get non gen retractable, but they do take up a bit of room..

In the bush non retracts are better, retractable won't let you move once locked, so looking over your shoulder can be a bitch..

Author:  steak_knife [ Mon Apr 04, 2011 6:44 am ]
Post subject:  Re: Seat belts

steak_knife wrote:
Built4thrashing wrote:
Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.


Not 100% true, you can get non gen retractable, but they do take up a bit of room..

In the bush non retracts are better, retractable won't let you move once locked, so looking over your shoulder can be a bitch..


Oh, & they are not cheap.....

Author:  joel88 [ Mon Apr 04, 2011 7:10 am ]
Post subject:  Re: Seat belts

So I am better off just putting standard ones back in?

Author:  steak_knife [ Mon Apr 04, 2011 7:24 am ]
Post subject:  Re: Seat belts

joel88 wrote:
So I am better off just putting standard ones back in?


you can get new lap/sash for around $90, the retractable are (from memory) around $350... each...

go have a look under your B pilor, see if there is a plate there with 4 philip's head screw's holding in on, if so easy fit for retractable, if not you'll have to bolt them to the lower point of the std one, when people get in & out they can bump em, making adjustment needed again..
Get's a lil monotonous adjusting them...

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/