All nt have handbrake on case. All wt have handbrake on diffs. U nless someone has farked around with it of course
| auszookers.com https://auszookers.com/forum/ |
|
| finally in but know has nocking sound https://auszookers.com/forum/viewtopic.php?f=5&t=20748 |
Page 1 of 1 |
| Author: | zook95 [ Wed Apr 06, 2011 10:21 pm ] |
| Post subject: | finally in but know has nocking sound |
ok im about to take a transfer out of my sj70 widetrack and swap it with my sj50 widetrack transfer is therre anithing different or anithing i have to know before i do it, cheers luke |
|
| Author: | SierraDan [ Wed Apr 06, 2011 11:33 pm ] |
| Post subject: | Re: transfer swap check |
As far as I'm aware if they're both widetrack 1.3 transfers then all is good. |
|
| Author: | zook95 [ Thu Apr 07, 2011 12:15 am ] |
| Post subject: | Re: transfer swap check |
thats what i think too but anyway ive unbolted all the shafts and unplugged the speedo cable the only thing now is the plastic switch thingy that i can unplug apart without braking anyone know??? |
|
| Author: | zooky08 [ Thu Apr 07, 2011 12:17 am ] |
| Post subject: | Re: transfer swap check |
Sj50 has the handbrake on the transfer Are you taking that off or using it |
|
| Author: | zook95 [ Thu Apr 07, 2011 12:24 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
are you talking about the drum handbrake on the back of the transfer if so no im pretty sure it only 1L transfers that had that but no ths on is a 1.3L so the handbrake isnt on transfer |
|
| Author: | zukmeista [ Thu Apr 07, 2011 12:39 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
All nt have handbrake on case. All wt have handbrake on diffs. U nless someone has farked around with it of course
|
|
| Author: | zook95 [ Thu Apr 07, 2011 12:59 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
yer true, ok i have both transfers side by side now im home alone any ideas how i can lift the new one up in bymyself cheers guys |
|
| Author: | Fatzook [ Thu Apr 07, 2011 1:18 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
With your arms. Thats how I have always done it 
|
|
| Author: | zook95 [ Thu Apr 07, 2011 1:21 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
hahah ok ill give it a go ill let you know how many teeth i have got afterwards haha |
|
| Author: | JrZook [ Thu Apr 07, 2011 1:24 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
Fatzook wrote: With your arms. Thats how I have always done it
Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place |
|
| Author: | Fatzook [ Thu Apr 07, 2011 1:26 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
JrZook wrote: Fatzook wrote: With your arms. Thats how I have always done it Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place WTF are abs? 
|
|
| Author: | tanshi [ Thu Apr 07, 2011 1:33 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
JrZook wrote: Fatzook wrote: With your arms. Thats how I have always done it Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place as long as the car is lifted, i doubt i would get under a stock zook with a transfer on my guts. |
|
| Author: | JrZook [ Thu Apr 07, 2011 1:38 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
Fatzook wrote: JrZook wrote: Fatzook wrote: With your arms. Thats how I have always done it Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place WTF are abs? Lolz something us lighter ppl have 
|
|
| Author: | JrZook [ Thu Apr 07, 2011 1:41 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
tanshi wrote: JrZook wrote: Fatzook wrote: With your arms. Thats how I have always done it Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place as long as the car is lifted, i doubt i would get under a stock zook with a transfer on my guts. Or use axle stands if it too low. |
|
| Author: | zooky08 [ Thu Apr 07, 2011 1:48 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
zook95 wrote: are you talking about the drum handbrake on the back of the transfer if so no im pretty sure it only 1L transfers that had that but no ths on is a 1.3L so the handbrake isnt on transfer Sj50 is a nt 1.3 so it should have a drum handbreak
Well mine has any way |
|
| Author: | zukmeista [ Thu Apr 07, 2011 2:21 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
Not nessecarily. I have an SJ50 wt
|
|
| Author: | SuziBlu [ Thu Apr 07, 2011 2:27 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
Fatzook wrote: JrZook wrote: Fatzook wrote: With your arms. Thats how I have always done it Yea what he said! Just rest it on your abs first then crawl under the car with it on top of ya and push it up into place WTF are abs? mmmmmm abs yummmmmmm Maybe you rest the transfer on them to tenderize or something. |
|
| Author: | zooky08 [ Thu Apr 07, 2011 2:30 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
zukmeista wrote: Not nessecarily. I have an SJ50 wt Well that sums it up then 
|
|
| Author: | zook95 [ Thu Apr 07, 2011 4:05 am ] |
| Post subject: | Re: transfer plastic switch (how to undo) |
got it in still with all my teeth but it makes a knocking sound from the tunnel somewhere what could it be |
|
| Author: | TZAR [ Thu Apr 07, 2011 4:58 am ] |
| Post subject: | Re: finally in but know has nocking sound |
The dog is trapped in there!!!!! |
|
| Author: | skyman [ Sun Apr 10, 2011 6:15 am ] |
| Post subject: | Re: finally in but know has nocking sound |
Did ya figure it out? It;s probably a broken or loose mounting point allowing it to beat on the side of the transmission tunnel. happened to me anyways. |
|
| Author: | foolsp33d [ Sun Apr 10, 2011 8:34 am ] |
| Post subject: | Re: finally in but know has nocking sound |
checked ya unis? could be a broken weld on the cap of the jack shaft also.. I know mines busted a couple of times... + likes for Q bond lol.. |
|
| Author: | zook95 [ Sun Apr 10, 2011 8:42 am ] |
| Post subject: | Re: finally in but know has nocking sound |
TZAR wrote: The dog is trapped in there!!!!!
hahah yer lol 
|
|
| Author: | zook95 [ Sun Apr 10, 2011 8:43 am ] |
| Post subject: | Re: finally in but know has nocking sound |
NOTE TO ZOOK95: -stop bieng so stupid -and to fill the greas nipple with grease duhhhhh hahah all good now guys but my clutch cable shit itself out bush new problem hahaha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
