| auszookers.com https://auszookers.com/forum/ |
|
| Installing VL engine mounts to g16b https://auszookers.com/forum/viewtopic.php?f=5&t=20811 |
Page 1 of 1 |
| Author: | dp87 [ Sat Apr 09, 2011 12:14 am ] |
| Post subject: | Installing VL engine mounts to g16b |
Just got my VL engine mounts for my g16b conversion 
I'm just wondering how to fit them because there is a small raised up nipple sort of thing on the engine side of the mounts I got. The nipple doesn't line up with the hole on the metal brackets on the engine. Should I drill a new hole in the bracket for the nipple to fit in.... Or should I just cut it off and not worry about it? |
|
| Author: | shep [ Sat Apr 09, 2011 12:19 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
i just ground it of and bolted it on. |
|
| Author: | SuziBlu [ Sat Apr 09, 2011 2:05 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
shep wrote: i just ground it of and bolted it on.
X2 |
|
| Author: | steak_knife [ Sat Apr 09, 2011 2:07 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
SuziBlu wrote: shep wrote: i just ground it of and bolted it on. X2 correct, fit the driver's first & you may need to leaver the passenger side a lil bit to get it to line up.. |
|
| Author: | SuziBlu [ Sat Apr 09, 2011 2:16 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
steak_knife wrote: SuziBlu wrote: shep wrote: i just ground it of and bolted it on. X2 correct, fit the driver's first & you may need to leaver the passenger side a lil bit to get it to line up.. It was only the passenger side that was breaking, I bought two mounts, done the passenger side, and, I er, still have the other on me shelf. I may get around to it, looks like a prick of a job but. So im a bit lazy. |
|
| Author: | dp87 [ Sat Apr 09, 2011 3:27 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
Ok sweet i cut it off. Looks pretty pointless anyway its tiny. Probs won't be putting the engine in the car yet. Still gotta sort out the sump and the thermostat housing |
|
| Author: | dp87 [ Sat Apr 09, 2011 3:28 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
Ok sweet i cut it off. Looks pretty pointless anyway its tiny. Probs won't be putting the engine in the car yet. Still gotta sort out the sump and the thermostat housing |
|
| Author: | 31zook [ Sun Apr 10, 2011 9:07 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
what model engine mount am i after? i have a broken passengers side one to do and it's making my engine kick 30deg on TBI cold start 
|
|
| Author: | steak_knife [ Sun Apr 10, 2011 9:09 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
31zook wrote: what model engine mount am i after? i have a broken passengers side one to do and it's making my engine kick 30deg on TBI cold start
6cyl Vl crumpledoor... |
|
| Author: | mondo [ Sun Apr 10, 2011 9:10 am ] |
| Post subject: | Re: Installing VL engine mounts to g16b |
i'll be up for one of these once my engine is run in...im sure of it |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|