| auszookers.com https://auszookers.com/forum/ |
|
| wiring https://auszookers.com/forum/viewtopic.php?f=5&t=21061 |
Page 1 of 1 |
| Author: | russty_2008 [ Sat Apr 16, 2011 1:26 pm ] |
| Post subject: | wiring |
ive been looking for hours does anyone have the pinout for a 96 baleno (with dizzy) its a 6k 1.6 e24 33920-60gm1 112000-3081 12v denso |
|
| Author: | MrRocky [ Sat Apr 16, 2011 10:26 pm ] |
| Post subject: | Re: wiring |
try this and scroll down http://www.redlinegti.com/forum/vt.19261.htm |
|
| Author: | want33s [ Sat Apr 16, 2011 11:28 pm ] |
| Post subject: | Re: wiring |
None of those links work. |
|
| Author: | russty_2008 [ Sun Apr 17, 2011 10:37 am ] |
| Post subject: | Re: wiring |
Where is the tacho meant to be hooked up to |
|
| Author: | skyman [ Sun Apr 17, 2011 1:44 pm ] |
| Post subject: | Re: wiring |
If you are looking for the tacho lead under the bonnet it is the solid brown wire found near your coil and distributor. If you are looking for it under the dash I can't help, mine was plug and play in the interior. |
|
| Author: | MrRocky [ Sun Apr 17, 2011 2:01 pm ] |
| Post subject: | Re: wiring |
you can open the ecu cover and written on the circuit board should be a symbol tach next to one of the pins from memory. im pretty sure thats the one i used for the signal or it might have been from the coil ? sorry its been quite a while since ive done it, the details are a bit fuzzy |
|
| Author: | want33s [ Sun Apr 17, 2011 8:31 pm ] |
| Post subject: | Re: wiring |
There ya go Russ... Good luck.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|