| auszookers.com https://auszookers.com/forum/ |
|
| U Bolts on NT and WT, Are they different? https://auszookers.com/forum/viewtopic.php?f=5&t=21093 |
Page 1 of 1 |
| Author: | SierraEchoX-ray [ Sun Apr 17, 2011 10:56 am ] |
| Post subject: | U Bolts on NT and WT, Are they different? |
Hey guys, ordered some EFS U-bolts for the front of my SJ40 NT and i was replacing the outer passenger one and noticed it is a different size. Havent checked the drivers side one yet so i thought i might ask before i take it off for an exact comparison. Are the U bolts between the Narrow Track and the Wide track different? part numbers i have currently... C655-passenger side C654-drivers side any help would greatly be appreciated Karl |
|
| Author: | Joe [ Sun Apr 17, 2011 11:10 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
303zuke wrote: LJ50, LJ80 and SJ40 all have small diameter axle tubes than the 1.3 Sierras, so the bolt pattern on the spring plate is smaller spacing and the bolts a smaller width. They are a smaller thread and nut with smaller bar size.
|
|
| Author: | SierraEchoX-ray [ Sun Apr 17, 2011 11:16 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
Thanks very much for that! I will contact the supplier tomorrow and see if there is a listing for them |
|
| Author: | 303zuke [ Sun Apr 17, 2011 2:32 pm ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
It's not that it's a narrow track, it engine size and axle tube thickness. The 1.0lts have smaller axle tubes and U-bolts to both the NT 1.3 and the WT 1.3. Even though they are both Narrow Track Sierras, there are plenty of detail differences between the NT 1.3 and the 1.0 Sierra, and you shouldn't assume that all bits are the same. |
|
| Author: | Gwagensteve [ Sun Apr 17, 2011 9:43 pm ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
WT and NT sierras have a different driver's side inner U bolt due to the different spring pad spacing. On the NT, the U bolt is longer because it sits further up the diff pumpkin. Steve. |
|
| Author: | SierraEchoX-ray [ Mon Apr 18, 2011 11:43 pm ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
Thanks for the info guys. Called the guys who supplied me with the U bolts, they said that there was only one listing for sierra's in his book. He is going to find out more today and hopefully find the right bolts. |
|
| Author: | tonyevans [ Mon Apr 18, 2011 11:53 pm ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
SierraEchoX-ray wrote: Thanks for the info guys. Called the guys who supplied me with the U bolts, they said that there was only one listing for sierra's in his book. He is going to find out more today and hopefully find the right bolts.
If it's the same guy I got mine from (and I had the same problem) I got the same excuse and he wanted me to pay $50 extra to get the right size made up so I found the information he needed for stock ones and he said he would "Continue his research into it" - Very impressed NOT. |
|
| Author: | SierraEchoX-ray [ Tue Apr 19, 2011 5:41 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
The guy i ordered them through is a family friend and always very helpful. I took down some rough measurements and called him back. He said that they didn't match up with anything from Iron Man or EFS. Has anyone ever replaced theirs and possibly still have the part numbers? The reason i am replacing them is because one of the previous owners has put some other U bolts in and they are to long and i am worried about them catching on rocks or something....worse case scenario i get the angle grinder onto them. |
|
| Author: | tanshi [ Tue Apr 19, 2011 5:46 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
efs, do them cos thats where i have bought mine from. call carrolls springs |
|
| Author: | zooky08 [ Tue Apr 19, 2011 6:45 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
Can I ask why not Buy a different brand? Or do you have efs springs already on your car |
|
| Author: | SierraEchoX-ray [ Tue Apr 19, 2011 7:00 am ] |
| Post subject: | Re: U Bolts on NT and WT, Are they different? |
Thanks Tanshi. Just emailed them well i was planning on buying through my friends business and he stocks EFS and said they were a good brand to go with. Haven't really inquired any other places cause i have been busy lately. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|