| auszookers.com https://www.auszookers.com/forum/ |
|
| lockrite https://www.auszookers.com/forum/viewtopic.php?f=5&t=21107 |
Page 1 of 1 |
| Author: | ZOOKCREW [ Mon Apr 18, 2011 3:08 am ] |
| Post subject: | lockrite |
my mate has a diff head with locker in already , just wondering , its out of a n/t , will it fit in a w/t |
|
| Author: | SuziBlu [ Mon Apr 18, 2011 3:10 am ] |
| Post subject: | Re: lockrite |
Different ratios to start with, WT are 3.7-1, NT are 3.9-1 |
|
| Author: | christover1 [ Mon Apr 18, 2011 3:13 am ] |
| Post subject: | Re: lockrite |
1.3 nt diff will fit a 1.3 wt. (1.o nt will not fit) But ratios could be different, so you may have to swith ring and pinion over. |
|
| Author: | LittleJeep [ Mon Apr 18, 2011 3:27 am ] |
| Post subject: | Re: lockrite |
Or switch the carrier with the lockright into the WT pinion housing. |
|
| Author: | ZOOKCREW [ Mon Apr 18, 2011 12:59 pm ] |
| Post subject: | Re: lockrite |
Thanks for your help guys .. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|