i make these vitara transfers at half the length they were. joined to a sierra transfer with 2 uni shaft.
| auszookers.com https://auszookers.com/forum/ |
|
| sierra T/cas to vit box https://auszookers.com/forum/viewtopic.php?f=5&t=2124 |
Page 1 of 1 |
| Author: | norm [ Sun May 18, 2008 10:26 pm ] |
| Post subject: | sierra T/cas to vit box |
how you going fellas, just wondering how hard is it to put a sierra t/cas to a vit box.. what needs to be done |
|
| Author: | royce [ Sun May 18, 2008 10:34 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
find antts members thread, he ran a vit box,vit transfer and sierra transfer you need to cut the front output off the vit transfer and make up a mount to link the sierra transfer to teh vit transfer and a driveshaft ends up pretty long as well |
|
| Author: | joeblow [ Mon May 19, 2008 12:10 am ] |
| Post subject: | Re: sierra T/cas to vit box |
|
i make these vitara transfers at half the length they were. joined to a sierra transfer with 2 uni shaft. |
|
| Author: | Damo [ Mon May 19, 2008 2:29 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
There's a mob in the states doing a similar thing but the 2 tcases are bolted together solid, no jack shaft. Could you do the same thing with your setup Joe? |
|
| Author: | joeblow [ Mon May 19, 2008 5:16 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
can do...but ends up way too expensive. and if you ever have to remove the cases its a pita. |
|
| Author: | joeblow [ Mon May 19, 2008 5:18 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
can do...but ends up way too expensive. and if you ever have to remove the cases its a pita. |
|
| Author: | antt [ Mon May 19, 2008 10:01 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
first time i've seen it done that way joeblow, not a bad idea at all i did similar with mine, chopped the front output off, welded it shut to still hold oil. used 2 sierra flanges bolted together to join them, and they were then mounted solid together. steve got some pics of it on here somewhere |
|
| Author: | joeblow [ Mon May 19, 2008 10:59 pm ] |
| Post subject: | Re: sierra T/cas to vit box |
saw the pics. did the same thing bout 14 years ago, problem was too many vibes. i now make em half the size and had new rear output splined flanges made.you only end up moving the stock transfer back about 50- 70mm, unfortunately a little more with a 4 speed auto. this way i can keep em pretty cheap and simple....but oh so tuff too. remember, will do nothing for highway gearing, and better suited to diff gears than rockhoppers. |
|
| Author: | antt [ Tue May 20, 2008 2:36 am ] |
| Post subject: | Re: sierra T/cas to vit box |
ah, so are you from 4play in victoria? have you got a pic of the complete setup? |
|
| Author: | joeblow [ Tue May 20, 2008 3:42 am ] |
| Post subject: | Re: sierra T/cas to vit box |
ummm...yes...formerly 4play.....moved on to bigger things...not patrols or tojos but. try get some pics up soon. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|