| auszookers.com https://auszookers.com/forum/ |
|
| Powermaster Denso 118mm 120A Alternator https://auszookers.com/forum/viewtopic.php?f=5&t=21343 |
Page 1 of 1 |
| Author: | Moag [ Tue Apr 26, 2011 4:47 am ] |
| Post subject: | Powermaster Denso 118mm 120A Alternator |
G'day Found this while doing Alternator research on the internet. Has anyone used, seen or know about these? They are a "one wire" alt. Exactly the same size (dimensions) as my 70A stock Alt in me Jimny. 
The one that takes my fancy is PN 8148 (XS-Volt reg) as you can play around with voltages, which may be a good thing to get the charge right for AGM/Gell batteries. Some more info can be found here |
|
| Author: | monley [ Tue Apr 26, 2011 5:04 am ] |
| Post subject: | Re: Powermaster Denso 118mm 120A Alternator |
http://www.auszookers.com/index.php?nam ... ic&t=14726
|
|
| Author: | Moag [ Tue Apr 26, 2011 5:11 am ] |
| Post subject: | Re: Powermaster Denso 118mm 120A Alternator |
monkey wrote: http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=14726
Yep!! Looking into this one too 
|
|
| Author: | squizzytaylor [ Tue Apr 26, 2011 5:21 am ] |
| Post subject: | Re: Powermaster Denso 118mm 120A Alternator |
That looks pretty well the same as the Denso unit I used, its also the same dimensions but it runs a 17mm shaft and is a bit deeper in the body, very happy with my swapover. |
|
| Author: | Moag [ Tue Apr 26, 2011 5:34 am ] |
| Post subject: | Re: Powermaster Denso 118mm 120A Alternator |
squizzytaylor wrote: That looks pretty well the same as the Denso unit I used, its also the same dimensions but it runs a 17mm shaft and is a bit deeper in the body, very happy with my swapover.
Yep!!
Still looking at the mod you came up with, as it's a easy alt to get hold of, simple but tight fit etc. I'm like the above more because of what you can do with it - it being adjustable for different battery types etc |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|