yep, got a plastic washer behind it that makes em stick so melting it will make it loose
| auszookers.com https://auszookers.com/forum/ |
|
| diff filler plug https://auszookers.com/forum/viewtopic.php?f=5&t=21356 |
Page 1 of 1 |
| Author: | truongski [ Tue Apr 26, 2011 9:12 am ] |
| Post subject: | diff filler plug |
Hi guys, Just wondering if someone could weld a bolt onto my diff filler plug so I can get it off. Any help would be appreciated. |
|
| Author: | royce [ Tue Apr 26, 2011 9:16 am ] |
| Post subject: | Re: diff filler plug |
yep, got a plastic washer behind it that makes em stick so melting it will make it loose
|
|
| Author: | zukmeista [ Tue Apr 26, 2011 9:17 am ] |
| Post subject: | Re: diff filler plug |
Not trying to be all grimbo or anyything but it seems like there is 50 million threads on this a week  Seriously, just do a search or even just scroll down the page, it's all been answered before 
|
|
| Author: | abclarke [ Tue Apr 26, 2011 9:25 am ] |
| Post subject: | Re: diff filler plug |
royce wrote: yep, got a plastic washer behind it that makes em stick so melting it will make it loose
Worked with mine 
|
|
| Author: | Fatzook [ Tue Apr 26, 2011 9:28 am ] |
| Post subject: | Re: diff filler plug |
zukmeista wrote: Not trying to be all grimbo or anyything but it seems like there is 50 million threads on this a week
Seriously, just do a search or even just scroll down the page, it's all been answered before Fuck off ass bandit! He is asking for someone to weld it for him. I'm on the northside. If you have no offers from down your way drop me a PM. |
|
| Author: | royce [ Tue Apr 26, 2011 9:29 am ] |
| Post subject: | Re: diff filler plug |
got a cold chisel, belt it loose with that |
|
| Author: | royce [ Tue Apr 26, 2011 9:30 am ] |
| Post subject: | Re: diff filler plug |
zukmeista wrote: Not trying to be all grimbo or anyything but it seems like there is 50 million threads on this a week
Seriously, just do a search or even just scroll down the page, it's all been answered before You know, ive mostly ignored you but dont think I dont notice what a wanker you are, best you shutup, there are 50 million threads on everything here how many different things can go wrong on a zook |
|
| Author: | lumpy_zook [ Tue Apr 26, 2011 9:30 am ] |
| Post subject: | Re: diff filler plug |
zukmeista wrote: Not trying to be all grimbo or anyything but it seems like there is 50 million threads on this a week
Seriously, just do a search or even just scroll down the page, it's all been answered before isnt he asking for someone to actually physically weld a bolt on for him? correct me if im wrong though. |
|
| Author: | abclarke [ Tue Apr 26, 2011 9:30 am ] |
| Post subject: | Re: diff filler plug |
royce wrote: got a cold chisel, belt it loose with that
Depends how tight it is, mine wasnt moving by hand and i belted the complete fuck out of it 
|
|
| Author: | steak_knife [ Tue Apr 26, 2011 9:43 am ] |
| Post subject: | Re: diff filler plug |
 South side!!!!!
|
|
| Author: | truongski [ Tue Apr 26, 2011 9:44 am ] |
| Post subject: | Re: diff filler plug |
I'll try the cold chisel thing tomorrow. If that fails, I'll send you a PM Mr. Fat. As to Zukmeister, if you could get a search engine to weld, you will be a rich man. |
|
| Author: | atari4x4 [ Tue Apr 26, 2011 9:49 am ] |
| Post subject: | Re: diff filler plug |
truongski wrote: As to Zukmeister, if you could get a search engine to weld, you will be a rich man.
|
|
| Author: | Gwagensteve [ Tue Apr 26, 2011 10:02 am ] |
| Post subject: | Re: diff filler plug |
One more thing to try before welding - grind down a 3/8 extension or something- (best is probably a 1/2to 3/8" adapter) so it has a nice sharp end and belt that in and give it a go. It's worked for me. The square drive ends often get screwed up when mechanics shove rattle guns in them to undo them. Rattle guns have extended snouts that stop the square drive fully engaging. Just something to have a go at. It's worked for me in the past. Steve. |
|
| Author: | truongski [ Tue Apr 26, 2011 10:07 am ] |
| Post subject: | Re: diff filler plug |
I have the 10mm square bit and that didn't work. I'll try heating it up and hammering in the bit and see if that works tomorrow. Do the fill plugs need to be on tight? |
|
| Author: | abclarke [ Tue Apr 26, 2011 10:09 am ] |
| Post subject: | Re: diff filler plug |
truongski wrote: I have the 10mm square bit and that didn't work. I'll try heating it up and hammering in the bit and see if that works tomorrow.
Do the fill plugs need to be on tight? Tight but not that tight, some people just go stupid on them. |
|
| Author: | truongski [ Tue Apr 26, 2011 10:15 am ] |
| Post subject: | Re: diff filler plug |
I thought so. |
|
| Author: | royce [ Tue Apr 26, 2011 10:17 am ] |
| Post subject: | Re: diff filler plug |
vitara garbox fillers and front diff fillers, never come out unless you leave em that loose they rattle out
|
|
| Author: | Fatzook [ Tue Apr 26, 2011 10:19 am ] |
| Post subject: | Re: diff filler plug |
royce wrote: vitara garbox fillers and front diff fillers, never come out unless you leave em that loose they rattle out
X2. I have a few new ones in my toolbox, because its so common to destroy them trying to get them out
|
|
| Author: | buzbox [ Tue Apr 26, 2011 10:21 am ] |
| Post subject: | Re: diff filler plug |
Fatzook wrote: royce wrote: vitara garbox fillers and front diff fillers, never come out unless you leave em that loose they rattle out X2. I have a few new ones in my toolbox, because its so common to destroy them trying to get them out Speaking of which, where can I buy new ones? Genuine zook spares? |
|
| Author: | truongski [ Tue Apr 26, 2011 10:23 am ] |
| Post subject: | Re: diff filler plug |
the gearbox and transfer ones were easy to get out. I'm guess because the socket is deeper so you can get more leverage. The front diff was easy as well, but when I got to the rear diff, it was stuck. Lucky I didn't crack the drain plug before the filler plug. |
|
| Author: | Fatzook [ Tue Apr 26, 2011 10:31 am ] |
| Post subject: | Re: diff filler plug |
buzbox wrote: Fatzook wrote: royce wrote: vitara garbox fillers and front diff fillers, never come out unless you leave em that loose they rattle out X2. I have a few new ones in my toolbox, because its so common to destroy them trying to get them out Speaking of which, where can I buy new ones? Genuine zook spares? I get mine from lowrange. |
|
| Author: | truongski [ Tue Apr 26, 2011 10:38 am ] |
| Post subject: | Re: diff filler plug |
You can get them from Suzistore as well. I'm going to see if the local Suzuki shop has some, otherwise i'll get them from Suzistore. |
|
| Author: | ajsr [ Tue Apr 26, 2011 11:12 am ] |
| Post subject: | Re: diff filler plug |
put anti seize on them or teflon tape before you reinstall and its all good next time |
|
| Author: | zammit [ Tue Apr 26, 2011 12:17 pm ] |
| Post subject: | Re: diff filler plug |
try giving them a spray with yield. it worked for me! |
|
| Author: | truongski [ Wed Apr 27, 2011 8:19 am ] |
| Post subject: | Re: diff filler plug |
Stekky got it off with shear strength. 
|
|
| Author: | ajsr [ Wed Apr 27, 2011 8:20 am ] |
| Post subject: | Re: diff filler plug |
truongski wrote: Stekky got it off with shear strength.
owwwwww wow this stekky character sounds scary tough 
|
|
| Author: | steak_knife [ Wed Apr 27, 2011 8:25 am ] |
| Post subject: | Re: diff filler plug |
ajsr wrote: truongski wrote: Stekky got it off with shear strength. owwwwww wow this stekky character sounds scary tough Buff as mate....
|
|
| Author: | mondo [ Wed Apr 27, 2011 8:29 am ] |
| Post subject: | Re: diff filler plug |
steak_knife wrote: ajsr wrote: truongski wrote: Stekky got it off with shear strength. owwwwww wow this stekky character sounds scary tough Buff as mate.... HURCULES HURCULES HURCULES |
|
| Author: | steak_knife [ Wed Apr 27, 2011 8:31 am ] |
| Post subject: | Re: diff filler plug |
|
|
| Author: | Nagz [ Wed Apr 27, 2011 8:47 am ] |
| Post subject: | Re: diff filler plug |
iv had a mechanic creack the housing on my old skyline he did it so tight (was the bolt type) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|