| auszookers.com https://auszookers.com/forum/ |
|
| Valve Cover Gasket https://auszookers.com/forum/viewtopic.php?f=5&t=2138 |
Page 1 of 1 |
| Author: | Mike [ Wed May 21, 2008 1:38 am ] |
| Post subject: | Valve Cover Gasket |
is it just me or are ACL gasket not worth the cork they are made out of? i went to my local repco and they sold me a JN606 for my 1.3 and its no where near fitting. does anyone know of another gasket that does fit? |
|
| Author: | lilzook [ Thu May 22, 2008 3:46 pm ] |
| Post subject: | Re: Valve Cover Gasket |
what was wrong with it? from memory if it says "barina" on it, that one fit my sierra no problems. Stick the gasket onto the the rocker cover first (bend/press in the cork tabs to lock it onto the rocker cover) then just bolt it down. worked fine for me. |
|
| Author: | Mike [ Thu May 22, 2008 10:13 pm ] |
| Post subject: | Re: Valve Cover Gasket |
me and a mate spent half an hour the other night trying to get the tabs to line up with the notches in the valve cover but it just wasn't happening we were both sure it was the wrong one but then the next morning i had a look at it and it fit straight away |
|
| Author: | stockman [ Wed Dec 14, 2011 6:45 am ] |
| Post subject: | Re: Valve Cover Gasket |
Mike wrote: me and a mate spent half an hour the other night trying to get the tabs to line up with the notches in the valve cover but it just wasn't happening we were both sure it was the wrong one but then the next morning i had a look at it and it fit straight away
They are directional |
|
| Author: | ZookFan [ Wed Dec 14, 2011 7:12 am ] |
| Post subject: | Re: Valve Cover Gasket |
lilzook wrote: what was wrong with it? from memory if it says "barina" on it, that one fit my sierra no problems. Stick the gasket onto the the rocker cover first (bend/press in the cork tabs to lock it onto the rocker cover) then just bolt it down. worked fine for me.
X2 done two already n leaks yet 
|
|
| Author: | ZookFan [ Wed Dec 14, 2011 7:13 am ] |
| Post subject: | Re: Valve Cover Gasket |
lilzook wrote: what was wrong with it? from memory if it says "barina" on it, that one fit my sierra no problems. Stick the gasket onto the the rocker cover first (bend/press in the cork tabs to lock it onto the rocker cover) then just bolt it down. worked fine for me.
X2 put new gaskets on two zooks no leaks yet
|
|
| Author: | Scrawny [ Wed Dec 14, 2011 7:15 am ] |
| Post subject: | Re: Valve Cover Gasket |
I miss Mike 
|
|
| Author: | stocker [ Wed Dec 14, 2011 7:15 am ] |
| Post subject: | Re: Valve Cover Gasket |
mmm... Liquid Gasket FTW |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|