make sure you put a number plate spinner in there too
the back door wont come off cause that only happens in Victoria
| auszookers.com https://auszookers.com/forum/ |
|
| Rear number plate https://auszookers.com/forum/viewtopic.php?f=5&t=2145 |
Page 1 of 1 |
| Author: | Damo [ Wed May 21, 2008 4:52 pm ] |
| Post subject: | Rear number plate |
Got pulled over yesty for a RBT and the copper suggested I move my number plate as the tow bar was blocking it. Anyone done that before? Pics? |
|
| Author: | steve [ Wed May 21, 2008 5:07 pm ] |
| Post subject: | Re: Rear number plate |
kymbo use to have his on the tailgate with a light above it, easy enough to do. |
|
| Author: | Damo [ Wed May 21, 2008 5:20 pm ] |
| Post subject: | Re: Rear number plate |
steve wrote: kymbo use to have his on the tailgate with a light above it, easy enough to do.
Yeah, i have a goofy bracket on there for my UHF antenna, so would have to move or modify that. I was thinking of using the spare mount, but that might be a PITA when you have to take off the spare. |
|
| Author: | royce [ Wed May 21, 2008 5:22 pm ] |
| Post subject: | Re: Rear number plate |
I did it on the back of a jerrycan holder, I think straight on the back door with a spare would be anti ADR cause of visability angle rules |
|
| Author: | Damo [ Wed May 21, 2008 5:48 pm ] |
| Post subject: | Re: Rear number plate |
royce wrote: I did it on the back of a jerrycan holder, I think straight on the back door with a spare would be anti ADR cause of visability angle rules
Hey I know, maybe I should do a jerrycan holder, UHF antenna mount and number plate all in one. That would work. Then all i'll have to worry about is my tailgate falling off! |
|
| Author: | royce [ Wed May 21, 2008 5:53 pm ] |
| Post subject: | Re: Rear number plate |
make sure you put a number plate spinner in there too
the back door wont come off cause that only happens in Victoria
|
|
| Author: | Damo [ Wed May 21, 2008 6:14 pm ] |
| Post subject: | Re: Rear number plate |
royce wrote: the back door wont come off cause that only happens in Victoria
Aahhhhh, just another reason to love being a... QUEENSLANDER!!! |
|
| Author: | sp1086 [ Wed May 21, 2008 7:37 pm ] |
| Post subject: | Re: Rear number plate |
I got booked years ago in my Sigma for that same thing & this was before speed cameras & redlight cameras too. Tow ball obstructing the number plate. What a load of crap I said to the cop'a, this was a factory fitted towbar ie it came on the vehicle from the factory, and really all it was obstructing was the "." in the middle. They ended up going all over my car and tried to get me for everything but thats all they could find. 
It was funny cause I heard them talking on the scanner to some traffic branch unit asking them questions on various stuff like how low were the spotlights allowed to be on the front of the car. They tried to get me for that too saying that spotlights arn't only allowed to be mounted below the bumper bar or above the standard headlights. Thing was they were drilled into the bottom of the bumper hanging down. So technicly they are mounted to the bumper its self so haha. Looser cop'a. 
He said if I wasnt towing a trailer I should take the tow bar off. Yeah Riiiite I said. So it ended up costing me $60 and about 1hour on the side of the road while the Pizza's I was delivering got cold. 
|
|
| Author: | Damo [ Wed May 21, 2008 7:42 pm ] |
| Post subject: | Re: Rear number plate |
sp1086 wrote: ...Sigma....<snip>
Blah Blah Blah <snip> ...So it ended up costing me $60 and about 1hour on the side of the road while the Pizza's I was delivering got cold. Serves you right for driving a Sigma  you shoulda just put a jerrycan holder on the back 
|
|
| Author: | sp1086 [ Thu May 22, 2008 10:47 am ] |
| Post subject: | Re: Rear number plate |
YEah well it looks like I learnt from my mistakes when I was 17 cauz I have one now..
I think when I make my rear tube bar up I might migrate the numberplate to the jerrycan holder as I plan on having a winch where the numberplate normally is. |
|
| Author: | Damo [ Thu May 22, 2008 11:32 am ] |
| Post subject: | Re: Rear number plate |
Yeah I reckon that's what i'll do. Looks like a good setup on yours. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|