auszookers.com
https://auszookers.com/forum/

03 GV v6 clutch problem
https://auszookers.com/forum/viewtopic.php?f=5&t=21506		 Page 1 of 1
Author:  [E-Z] [ Sun May 01, 2011 4:03 am ]
Post subject:  03 GV v6 clutch problem
Ok so I have a 03 grand vitara that I thought had a bad clutch master. Just the other day I thought it finally died. Very little clutch pedal, no t
Enough to select a gear. Put the rebuilt master on, no change, ok new slave cyl. Still no good, so I tried to lever the fork and it seems jammed, it's not that my pedal or hydraulics failed, but I think my throw out bearing or something internal has seized giving me to pedal?
Any one have any other thoughts of ideas?
Ryan
Author:  steak_knife [ Sun May 01, 2011 5:37 am ]
Post subject:  Re: 03 GV v6 clutch problem
Get a new clutch throw out fork & pivot bolt., may as well do a clutch kit & GENUINE rear main seal at the same time, those box's are not fun to get out (unlees on a hoist)
Author:  Taylor74 [ Sun May 01, 2011 7:59 am ]
Post subject:  Re: 03 GV v6 clutch problem
steak_knife wrote:
Get a new clutch throw out fork & pivot bolt., may as well do a clutch kit & GENUINE rear main seal at the same time, those box's are not fun to get out (unlees on a hoist)



X2 Very common for the grand vitaras,,, will have to do my XL7 soon
Author:  shabz [ Sun May 01, 2011 8:09 am ]
Post subject:  Re: 03 GV v6 clutch problem
^^^ Agreed.

Have a read through this thread, i went through it just recently. It may help.
http://www.auszookers.com/index.php?nam ... ic&t=19502
:wink:
Author:  [E-Z] [ Sun May 01, 2011 10:51 am ]
Post subject:  Re: 03 GV v6 clutch problem
Thanks guys :) seems like it's the clutch fork and pivot that had failed. Will be replacing everything as mentioned though :)
Author:  steak_knife [ Sun May 01, 2011 11:44 am ]
Post subject:  Re: 03 GV v6 clutch problem
Std excedy is the go
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/