| auszookers.com https://auszookers.com/forum/ |
|
| 94 seirra missing firing https://auszookers.com/forum/viewtopic.php?f=5&t=21614 |
Page 1 of 1 |
| Author: | outram [ Tue May 03, 2011 10:56 pm ] |
| Post subject: | 94 seirra missing firing |
hey guys had some work done to the carbi while ago and it came back with a miss just wondering where would be a good place in newcastle to get the carbi checked out cheers |
|
| Author: | SuziBlu [ Tue May 03, 2011 11:18 pm ] |
| Post subject: | Re: 94 seirra missing firing |
Misfires are usually associated with the spark rather that the carby. Id be starting the cr, and pulling a lead at a time off its plug, seeing if one of them makes no difference to the way the engine runs. If you pull a plug lead from a working plug, the engine will run ruff and vibrate, if its pulled from a plug that isnt working, no change in engine characteristics. IF you find this is the prob, then you must work out if its the dizzy cap, lead or plug. |
|
| Author: | steak_knife [ Tue May 03, 2011 11:42 pm ] |
| Post subject: | Re: 94 seirra missing firing |
SuziBlu wrote: Misfires are usually associated with the spark rather that the carby.
But a to rick to lean can cause miss fire's to.. Start with your spark plug's & work your way out, keep your plug's in order & post a pic... |
|
| Author: | SuziBlu [ Tue May 03, 2011 11:53 pm ] |
| Post subject: | Re: 94 seirra missing firing |
Stecky, your 100% right, but, i always start with the first things first sort of thing. In this instance, i suspect rich, but, electricals first. |
|
| Author: | steak_knife [ Tue May 03, 2011 11:59 pm ] |
| Post subject: | Re: 94 seirra missing firing |
SuziBlu wrote: Stecky, your 100% right, but, i always start with the first things first sort of thing.
In this instance, i suspect rich, but, electricals first.  I said that....... 
Viewing the spark plug's will tell me lot's, hence asking for them to be in order ( as in 1,2,3,4 as they came out)...... |
|
| Author: | JrZook [ Wed May 04, 2011 12:04 am ] |
| Post subject: | Re: 94 seirra missing firing |
outram wrote: hey guys had some work done to the carbi while ago and it came back with a miss just wondering where would be a good place in newcastle to get the carbi checked out cheers
If the carby just got done and nothing else, then id assume your miss is more of a lag,bog down or flatspot. Have more info? |
|
| Author: | outram [ Wed May 04, 2011 1:38 am ] |
| Post subject: | Re: 94 seirra missing firing |
sorry should of stated i have changed the leads ,plugs, dizzy cap and rotor button with no affect and its a bog down then i jumps back into life it wasn't doin it untill i got the work done on the carbi |
|
| Author: | JrZook [ Wed May 04, 2011 1:57 am ] |
| Post subject: | Re: 94 seirra missing firing |
outram wrote: sorry should of stated i have changed the leads ,plugs, dizzy cap and rotor button with no affect and its a bog down then i jumps back into life it wasn't doin it untill i got the work done on the carbi
Sounds like an accelerator pump issue |
|
| Author: | SuziBlu [ Wed May 04, 2011 1:58 am ] |
| Post subject: | Re: 94 seirra missing firing |
JrZook wrote: outram wrote: sorry should of stated i have changed the leads ,plugs, dizzy cap and rotor button with no affect and its a bog down then i jumps back into life it wasn't doin it untill i got the work done on the carbi Sounds like an accelerator pump issue X2 |
|
| Author: | steak_knife [ Wed May 04, 2011 3:46 am ] |
| Post subject: | Re: 94 seirra missing firing |
Or the vacuum advance line is on the wrong port of the carby... |
|
| Author: | LAY80N [ Wed May 04, 2011 7:11 am ] |
| Post subject: | Re: 94 seirra missing firing |
If you want a hand i could take a look at some stage in the next week or so. Layto.... |
|
| Author: | outram [ Wed May 04, 2011 10:44 pm ] |
| Post subject: | Re: 94 seirra missing firing |
hey mate that would be greatly apprecated cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|