So does his signature.
| auszookers.com https://auszookers.com/forum/ |
|
| body lift https://auszookers.com/forum/viewtopic.php?f=5&t=21647 |
Page 1 of 1 |
| Author: | mudzookacoatsy [ Wed May 04, 2011 11:05 am ] |
| Post subject: | body lift |
hey all i tryed to find old post bout bodylifts but cant. just wanting to know that easiest way of doing them and are they worth it. i got 2'' spring lift with standed shackles did have ext ones. just after a lil bit more height . |
|
| Author: | Fatzook [ Wed May 04, 2011 11:06 am ] |
| Post subject: | Re: body lift |
Are you trying to fit larger tyres? Or is it just lift for the sake of lift? |
|
| Author: | SierraDan [ Wed May 04, 2011 11:07 am ] |
| Post subject: | Re: body lift |
Picture looks like 31's. I assume tyre clearance and looks. |
|
| Author: | xedent [ Wed May 04, 2011 7:44 pm ] |
| Post subject: | Re: body lift |
So does his signature.
|
|
| Author: | nato78 [ Wed May 04, 2011 10:19 pm ] |
| Post subject: | Re: body lift |
Start spraying your bolts with wd40 or similar a few days before you plan on puting your lift in, will make it heaps easier to undo them when you start. Remove front and rear bars, grill and disconnect fuel filler hose at the neck before you start. Then remove ALL 10 body retention bolts. Then just use a trolley jack to start lifting the body off the chasis and insert blocks, do one side at a time. Make sure all 10 blocks are in before you put any bolts back in. Make sure when you start jacking that you aren't overstretching any hoses or cables and loosen as necessary That's all I got, someone else may be a bit more helpful |
|
| Author: | nato78 [ Wed May 04, 2011 10:27 pm ] |
| Post subject: | Re: body lift |
You may find this helpful, it's on outers http://www.outerlimits4x4.com/viewtopic.php?t=93393 I didn't have to touch the steering column when I did mine, so just work it out as you go |
|
| Author: | SierraDan [ Wed May 04, 2011 10:42 pm ] |
| Post subject: | Re: body lift |
xedent wrote: So does his signature.
Haha, Geez.. How did I manage to notice the tyre size in the picture but not the sig.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|