auszookers.com
https://auszookers.com/forum/

how to remove a fule tank from a 92 sierra
https://auszookers.com/forum/viewtopic.php?f=5&t=21673
Page 1 of 1

Author:  patch [ Thu May 05, 2011 7:55 am ]
Post subject:  how to remove a fule tank from a 92 sierra

as subject says can someone send me step by step guide on removing the fule tank please or is it pretty much strait forward?

any help would be great!

Author:  zook95 [ Thu May 05, 2011 8:03 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

:helloo: found this in the search bar for you
http://www.auszookers.com/index.php?nam ... +fuel+tank
8) hope it helps
cheers luke

Author:  patch [ Thu May 05, 2011 8:11 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

cheers luke! that will help big time.

Author:  mnemonix [ Thu May 05, 2011 8:11 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

Stick your head under the back of the car. Undo 4 x 14mm bolts.
Undo the filler/breather hose clamps and unclip the level sender wire.

It's a 15 minute job if you've never done it before and the tank is empty.

Author:  zook95 [ Thu May 05, 2011 8:12 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

patch wrote:
cheers luke! that will help big time.

no probs

Author:  want33s [ Thu May 05, 2011 8:15 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

Cut 4 lines.
Undo 4 bolts.
Tank falls on your head.

Works for me... :blink:

Author:  patch [ Thu May 05, 2011 8:17 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

want33s wrote:
Cut 4 lines.
Undo 4 bolts.
Tank falls on your head.

Works for me... :blink:


haha ill try that if the first attempt dosnt work lol

Author:  TryHard [ Thu May 05, 2011 8:20 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

want33s wrote:
Cut 4 lines.
Undo 4 bolts.
Tank falls on your head.

Works for me... :blink:


hahah the got to hurt ? :blink:

Author:  steak_knife [ Thu May 05, 2011 8:40 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

want33s wrote:
Cut 4 lines.
Undo 4 bolts.
Tank falls on your head.

Works for me... :blink:


i call Bs, every time I visit you make me remove a tank.... :helloo:

Author:  want33s [ Thu May 05, 2011 11:18 am ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

steak_knife wrote:
want33s wrote:
Cut 4 lines.
Undo 4 bolts.
Tank falls on your head.

Works for me... :blink:


i call Bs, every time I visit you make me remove a tank.... :helloo:

Oh c'mon. :roll: .. that was just once and only cause you wanted it so cheap... :wink: :crazy: :D

Author:  ZUKOFHZRD [ Thu May 05, 2011 3:01 pm ]
Post subject:  Re: how to remove a fule tank from a 92 sierra

9'' grinder

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/