Yeah sorry it's a 3pin from a 95 vitara but it didn't look like a hot wire type
| auszookers.com https://auszookers.com/forum/ |
|
| AFM https://auszookers.com/forum/viewtopic.php?f=5&t=21706 |
Page 1 of 1 |
| Author: | 4wheeljive [ Fri May 06, 2011 8:55 am ] |
| Post subject: | AFM |
My afm died and I was trying to sorce a nother one but was suprised at how extream the price of one was new so I was hopping some one can point in the direction of ether a cheap newy or a good second hand one |
|
| Author: | JrZook [ Fri May 06, 2011 8:56 am ] |
| Post subject: | Re: AFM |
Which AFM? MOre info... |
|
| Author: | mondo [ Fri May 06, 2011 9:01 am ] |
| Post subject: | Re: AFM |
is it the hot wire type? |
|
| Author: | boostedbrick [ Fri May 06, 2011 9:01 am ] |
| Post subject: | Re: AFM |
Later model vitara if i remember right from the build thread... |
|
| Author: | mondo [ Fri May 06, 2011 9:03 am ] |
| Post subject: | Re: AFM |
i had to track one down, i found a guy at capalaba 4x4 wreckers VERY helpful, sourced one from melbourne for me |
|
| Author: | royce [ Fri May 06, 2011 9:23 am ] |
| Post subject: | Re: AFM |
you can buy the 3 wire hotwire ones new for cheap |
|
| Author: | 89_tintop [ Fri May 06, 2011 9:31 am ] |
| Post subject: | Re: AFM |
hey mate... Try a company called AFI They are located at nerang on the gold coast or nardek. They are in sydney I think |
|
| Author: | royce [ Fri May 06, 2011 9:41 am ] |
| Post subject: | Re: AFM |
mine came from here http://www.rockauto.com/catalog/raframe ... de=1271506 they dont seem to have cheap new beck arnleys anymore, shame |
|
| Author: | 4wheeljive [ Fri May 06, 2011 11:27 am ] |
| Post subject: | Re: AFM |
Yeah sorry it's a 3pin from a 95 vitara but it didn't look like a hot wire type
|
|
| Author: | JrZook [ Fri May 06, 2011 2:01 pm ] |
| Post subject: | Re: AFM |
Geez u must have a pretty good air filter system... 
|
|
| Author: | royce [ Fri May 06, 2011 8:19 pm ] |
| Post subject: | Re: AFM |
yeah its a hotwire type, yeah the seal into teh airbox is stuffed 
whats wrong with it? |
|
| Author: | 4wheeljive [ Sat May 07, 2011 3:06 am ] |
| Post subject: | Re: AFM |
The piping between the air box and the afm perished and cracked as for what's wrong with it as far as I can see one of the copper tracks on this tiny bit of PCB bord is blown that is hanging in the middle of the show and I can't see any wires in there |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|