| auszookers.com https://auszookers.com/forum/ |
|
| reving https://auszookers.com/forum/viewtopic.php?f=5&t=21718 |
Page 1 of 1 |
| Author: | beerhound [ Sat May 07, 2011 2:06 am ] |
| Post subject: | reving |
Hey guys this has probably been covered a million times but can't find it in search, when driving along and I put my lights on the revs pick upto 3grand turn the lights of and the revs go back to normal any hints would be appreciated |
|
| Author: | SuziBlu [ Sat May 07, 2011 2:19 am ] |
| Post subject: | Re: reving |
I have carbys, an when I put on the lights, or the heater fan, the revs go up to around 15-1,700. 3,000 is pretty excessive. Mate has EFI, and no change of revs with lights or fan. |
|
| Author: | zooky08 [ Sat May 07, 2011 2:22 am ] |
| Post subject: | Re: reving |
Not sure what it's call but it's on your carby When you turn your lights on the car revs a bit more for the lights It's the same on a car when u press the a/c button the car idles up to run the compressor It's got to do with the switch on the front of the carby Sorry I cant help you any more than that Some one will come along nd tell you exactly wats wrong |
|
| Author: | beerhound [ Sat May 07, 2011 2:25 am ] |
| Post subject: | Re: reving |
cheers |
|
| Author: | Reubs [ Sat May 07, 2011 2:28 am ] |
| Post subject: | Re: reving |
On the front of the carby there is a vacuum actuator switched via the park light circuit that pulls on the throttle so the idle doesn't drop when your lights or a/c are on. Look at the front of the carby while someone is turning lights on and off and re-adjust the arm that moves, to get only a small amount of idle-up happening. This might help. http://www.auszookers.com/index.php?name=Forums&file=viewtopic&p=317509 |
|
| Author: | stockman [ Sat May 07, 2011 2:29 am ] |
| Post subject: | Re: reving |
It's called idle up. On the front of the carby the is a solonoid with a black rubber boot. When you turn the lights on the soloniod opens and pushes the bolt thats connected to the carby. Run the car, turn the lights on and adjust the bolt to decrease the idle. |
|
| Author: | beerhound [ Sat May 07, 2011 2:44 am ] |
| Post subject: | Re: reving |
Thanks oh mighty masterminds of ZUKland all fixed |
|
| Author: | SierraDan [ Sat May 07, 2011 3:36 am ] |
| Post subject: | Re: reving |
Running perfect now?
|
|
| Author: | stockman [ Sat May 07, 2011 3:54 am ] |
| Post subject: | Re: reving |
I have increased my idle to 1k and the idle up to 1.5k. |
|
| Author: | matty_wall [ Sat May 07, 2011 4:20 am ] |
| Post subject: | Re: reving |
Can anyone confirm that the sierra set up is the same as the vitara? My idle up doesnt work at all. |
|
| Author: | zooky08 [ Sat May 07, 2011 5:18 am ] |
| Post subject: | Re: reving |
matty_wall wrote: Can anyone confirm that the sierra set up is the same as the vitara? My idle up doesnt work at all. If it's the carby engine it should be very similar To the Sierra carby
|
|
| Author: | SuziBlu [ Sat May 07, 2011 5:21 am ] |
| Post subject: | Re: reving |
zooky08 wrote: matty_wall wrote: Can anyone confirm that the sierra set up is the same as the vitara? My idle up doesnt work at all. If it's the carby engine it should be very similar To the Sierra carbyIf its not the carby engine, it will possibly be different. hehe
|
|
| Author: | beerhound [ Sat May 07, 2011 7:00 am ] |
| Post subject: | Re: reving |
SierraDan wrote: Armsup Running perfect now?
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|